IS200SRTDH2ACB GE
IS200SRTDH2ACB GE
IS200SRTDH2ACB GE
Rockwell AB PhaseManager™用户手册（中文）
本手册介绍如何设置和编写Logix5000™ 控制器以使用设备阶段。其中提供的指导和示例可用于：
• 在包含设备阶段的部分中部署代码
• 设置设备的状态模型
• 对设备进行编程，以通过状态模型运行
• 使用设备阶段指令转换到不同的状态，处理故障，设置断点等等。
Logix5000 控制器指以下任何一种控制器：
• 1756 ControlLogix® 控制器
• 1769 CompactLogix™ 控制器
• 1789 SoftLogix5800™ 控制器
• 1794 FlexLogix™ 控制器
• 20D PoweFlex®700S with DriveLogix™ 控制器
PhaseManager 简介
PhaseManager™ 允许您向控制器添加设备阶段。设备阶段可让您更加轻松地对机器或设备的代码进行编写、使用和管理。
PhaseManager 帮助您以结构化方式编写设备代
group
The status information will be automatically reloaded. The configuration results and real-time process data are stored in RAM, and ram is installed on the Ethernet network card or battery card
The backup battery can maintain the configuration content and data in case of power failure.
Basic unit pmbo2f characteristics:
mouth
Installation slots of 4 fieldbus interface cards
c
Installation slot of 2 Ethernet network cards
Support redundant operation of Fieldbus interface card
Support hot plug of Fieldbus interface card
Technical indicators of basic unit pib02f:
CPU :Intel 80960HT25/75
32-bit RISC superscalar processor with operation speed of 150 MIPS
4 MB FLASH-EPROM
EEPROM，serial， 16 Kbit
o
Ram 8 MB (with error check and correction function, abb patent)
16 K internal cache (CPU cache RAM)
Ram backup battery (matchdog, optional redundancy)
Equipment internal temperature monitoring
Watchdog
I/0 sweeping cycle: configurable.
Time required to process 1000 IL (instructions):
< 1.0 ms (processing binary and 16 bit arithmetic instructions)
<2ms (processing fixed-point arithmetic instructions)
< 1.5ms (processing 32-bit floating-point arithmetic instructions)
Bthernet network card ei801f/ei802f/ei803f
The industrial Ethernet network card provides communication with the system network diginet s (iee802.3 Ethernet
