FOXBORO FEM100
FOXBORO FEM100
FOXBORO FEM100
12-24 kV柱上开关设备
断路器
·PVB柱上真空断路器（柱式）
·PVB-S柱上真空断路器（罐式）
负荷开关
·SECTOS柱上SF6负荷开关
·PVB-L柱上真空负荷开关
负荷隔离开关
·NPS柱上负荷隔离开关
隔离开关
·DCD柱上隔离开关
跌落式熔断器
·NCX、NCXF跌落式熔断器
40.5 kV户外开关设备
断路器
·OVB-VBF户外真空断路器
instruments and other intelligent devices.
The communication among process station, operator station and engineer station is realized through the system bus diginets (Industrial Ethernet). user
Different transmission media (RJ45 twisted pair, thin cable, thick cable or optical fiber cable and mixed media) and network topology can be selected for the system bus
Due to the adoption of tcp/ip protocol, the system can also realize ultra long distance communication with the help of public telephone network (dial-up mode) or satellite.
PLC and other subsystems communicate with industrial “system through Modbus protocol interface. The system also supports iec870-5 over control coordination
Discussion.
The flash EPROM inside PS provides more than 220 function modules (control algorithm subroutines), in addition to the base specified in IEC 61131 3 standard
In addition to this content, many powerful and strictly tested function blocks from practical engineering applications are also expanded. Any complex control
All schemes can be realized by the combination of these function blocks.
The function blocks provided by the system mainly fall into the following categories:
o
Analog quantity processing
o
Digital quantity processing
Loop adjustment
Logical sequence control
c
Logical operation
Monitoring function
Acquisition function
c
