PXI-6608 185745H-02
PXI-6608 185745H-02
PXI-6608 185745H-02
Connected Components Workbench作为单一开发环境，以配置设备、为Micro800控制器编程以及创建 HMI 屏幕。
Connected Components Workbench 支持 Micro800 控制器、PowerFlex驱动器、PanelView 800 图形终端、Guardmaster 440C-CR30 可配置安全继电器和速度监视安全继电器、GuardShield 450L 安全光栅、SMC 软启动器和 Kinetix 组件伺服驱动器。
Connected Components Workbench 软件可用于控制器编程和设备配置，集成有 HMI 编辑器，进一步简化了单机设备编程。
·Micro800 控制器
·PanelView Components 和 PanelView 800 图形终端
·Guardmaster 440C-CR30 安全继电器
·GuardShield 450L 安全光栅
number of PC tasks (such as data processing and visualization) has been increased. The use of PC-based control (= using a PC with an integrated PLC) is a more common solution than using standard PLC communication with a PC link. Pc-based control combines PLC with data processing on a PC with WinAC Slot 412/WinAC Slot 416.
WinAC Slot/WinAC Slot 416 integrates open-loop control and closed-loop control automation tasks, data processing, communication and visualization in a single PC. WinAC Slot/WinAC Slot 416 is based on the original Windows NT and integrates into the office world using standard interfaces. WinAC stands for Windows Automation Center.
WinAC Controlling with CPU 41x-2 PCI
WinAC Controlling is the controlling component for WinAC Slot 412/WinAC Slot 416. WinAC Controlling performs the tasks of a traditional programmable logic controller and is fully integrated into the PC. WinAC Controlling consists of either CPU 412-2 PCI or CPU 416-2 PCI. These cpus have the typical
