IMG_20220622_141725
IMG_20220622_141725
IMG_20220622_141725
罗克韦尔自动化公司状态监测系统有在线实时保护监测、在线自动巡检监测、以及离线监测不同的组成方式。系统要解决的问题是：了解关键设备和重点设备当前的运行状况、判断被监测机器的状态变化趋势、诊断被监测机器故障的发生部位和故障的严重程度，以及检查和验收大修或临时维修的效果，实现对设备故障早知道、早预报、早诊断，把故障消灭在萌芽之中。目的是提高设备运行完好率、减少设备停机时间及降低维修成本。
产品选型
一、9000/2100振动传感器
二、XM振动监测模块
三、EMONITOR监测分析及诊断软件
interface card provides – a fieldbus interface (PROFIBUS,
Can, FF, MODBUS, etc.). The configuration and parameter settings of the interface card itself and the field instrument (or remote i1/0) on the connected fieldbus are still
It is designed by the industrial “unified tool control bui lder without additional software. The interface card can be configured redundantly (separated between each other
Redundant basic unit pm802f) and can be plugged in and out and replaced online.
Fi830f: PROFIBUS DP interface card, as the master station, can connect 126 PROFIBUS DP slave stations, and the communication rate can reach 12mbd
One PS can plug in 4 fieldbus interfaces, connect 496 fieldbus devices, and one city (subsystem) of industrial “system can
Connect 4960 fieldbus devices (10000 i/0).
Fi820f: two serial interfaces are provided to connect the serial protocol equipment. The maximum transmission rate is 38.4kbd and can be configured. Its Standards Association
Modbus Different physical interfaces can be selected for different connection schemes, RS422, RS485, RS232. All interfaces are electrical isolation
Away. And the redundant operation is realized by two redundant field controllers.
Fi8i0f card is a triple can bus protocol interface card (rate 1mbd) used to connect industrial ial “conventional process control station
The i/0 protection unit of the PS is used to receive process signals from the rack mounted i/0 modules supported by the PS. Each field
