SST-DN3-PCI-2
SST-DN3-PCI-2
SST-DN3-PCI-2
设计灵活
> 灵活的拓扑结构允许便捷地整合各种设施
> 借助软件的全面整合功能，可以整合远程设备、分布式设备以及在同一以太网通
讯网络段上的其它设备
> 通过以太网通讯背板透明访问数据
> 通过位于远程I/O通讯模块上的服务端口可以便捷地实现与人机交互界面(HMI)的整合
> 具有与其它通用现场总线和设备通讯网络集成的接口界面，如AS- I总线、
Modbus、 Profibus 和 HART等
serial interfaces are provided to connect the serial protocol equipment. The maximum transmission rate is 38.4kbd and can be configured. Its Standards Association
Modbus Different physical interfaces can be selected for different connection schemes, RS422, RS485, RS232. All interfaces are electrical isolation
Away. And the redundant operation is realized by two redundant field controllers.
Fi8i0f card is a triple can bus protocol interface card (rate 1mbd) used to connect industrial ial “conventional process control station
The i/0 protection unit of the PS is used to receive process signals from the rack mounted i/0 modules supported by the PS. Each field controller PS can only be configured
-Block fi810f card. — The two fi810f interface cards on the redundant PS. can be switched redundantly.
S800 and S900 are distributed i/0 for process control stations. They communicate with their controllers through Prof ibusdp Fieldbus
Communication, which can be installed in the controland PA three levels, DP communication rate can be as high as 12Mb. The CAN (DIN/IS011898 standard) bus
The biggest feature is its super sturdiness and data security. The system of course also supports Modbus. The communication with the intelligent field
