3BSE030220R1 ABB
3BSE030220R1 ABB
3BSE030220R1 ABB
TeSys GV 电动机断路器提供紧凑、可靠、高效的解决方案，用于：
● 隔离
● 防止短路和过载；
● 手动开关控制 0.06 至 55 kW 的电机。
TeSys GV 有三个版本：
● 磁保护：具有防止短路功能的 GV2LE、GV2L、GV3L、GV4L、GV4LE。
● 热磁保护：具有防止短路、过载、缺相和相不平衡功能的GV2ME、GV2P、GV3P、GV4P。
● 高级保护：GV4PEM 兼具 GV4P 保护和电机堵转、起动时间过长、接地故障保
护等功能。
单磁式断路器经常与热继电器一起使用，以获得短路保护和过载保护。
GV2：宽 45 mm，适用于功率最高 15 kW 的电机
常用的断路器。具有大约 100 个附件和配件可供选择。GV2 和 TeSys D或 TeSys K
接触器可轻松用一个附件组装成单个模块。
GV2 具有高电气寿命（高达 100000 次操纵），使其非常适合直接手动控制电机，
尤其是GV2ME（热磁式断路器，Ith 高达 32 A）。
带延伸旋转手柄和可见脱扣指示的 GV2L 和 GV2P 非常适合机柜安装。
GV3：宽 55 mm，适用于功率最高 45 kW 的电机
basis)
WinAC Basis is a low-cost solution for control without precise time requirements, a large number of fast data processing and control tasks (control tasks refer to PLC control functions) combined or other PC tasks control occasions.
2. WinAC PN
The first SIMATIC CPU to support PROFInet communication standard, performance similar to WinAC Basis. WinAC PN supports Component-based Automation (CBA) and PROFInet communication standards. Component-based automation and PROFInet provide an open standard for data exchange between mechanical and system units in complex tasks. Data exchange is configured using the SIMATIC iMap tool. WinAC PN is suitable for the following tasks:
? Coordination and connectivity between machinery and workshop areas from across the complex system
? Control system units or machinery can be integrated into a full range of complex systems
WinAC Basis 4.1 has an option WinAC PN, and WinAC Basis 4.1 with the WinAC PN option supports PROFInet and CBA.
3. WinAC RTX(WinAC Real-time)
WinAC RTX provides the real-time subsystem of Windows 2000/XP with “hard real-time” and “crash resistant” features. It is suitable for control tasks with high speed and precise time requirements, such as motion control, closed-loop control, etc.
4. WinAC MP
WinAC MP is based on the WinCE operating system and the SIMATIC MP370(a multi-function panel) hardware platform. The MP370 is designed to be hard disk and fan free, and WinCE has real-time features that enable strict deterministic actions. WinAC MP is used in harsh industrial environments and where there is a lot of data to process.
5. WinAC Slot 412/416
It is inserted in the PC in the form of a board card,
