AI810 ABB
AI810 ABB
AI810 ABB
CP400 Soft 为用户提供了方便且功能强大的宏应用程序。它使得操作员终端能够执行 许多任务。例如：算术、逻辑、流控制、数据传输、比较、转换和系统服务指令。使用宏还 可以显著减小程序大小，并优化控制器效率。宏指令不仅允许操作员终端与控制器通信，而 且还可将其连接到其他设备。宏指令提供了高效的集成系统以及经济的硬件应用程序结构。 CP415 是一种带有 3.3 英寸 STN 液晶显示屏的人机界面 (HMI)，符合IP65/NEMA 4X （仅限室内使用）的防水和防尘标准。
CP415 获 CE 认证，可满足您在操作时的高瞬态抑制要求。此外， CP415 简洁的设计使其与其他计算机的连接更加灵活，因此可使您的计算机获得最佳性能。
CP400Soft 用于设计 CP415 应用程序；它是可靠的、用户友好的工具，与许多模型兼容。
environment. The device can be installed either in a cabinet or on a wall. System
complies with all current EMC standards and is CE marked
Chi.
Industrial” DCS system
design purpose: the most economical engineering investment, the most powerful control
function.
Five features of Industria1″ DCS system:
1. All-round integrated control
system, integrating DCS & PLC & Field Bus;
2. Using RISC SuperScalar high-speed CPU,
with super performance;
Three high reliability, strict industrial application practice, 
more than 1000 sets of application performance in China;
4. It has good openness,
flexibility and scalability;
Fifth, the project is easy, the interface is friendly, and
the maintenance is simple;
2. Industria1″ system communication
Industrial” system uses
international standard industrial bus. Field controller supports Profibus, FF, ModBus,
Can, etc.
International standard fieldbus, Profibus is the most widely used open
fieldbus international standard in the world, divided into FMS, DP and PA
Level 3, DP
communication rate can be as high as 12Mb. Profibus is used to connect intelligent
devices such as distributed I/0 stations and field bus instruments.
Communication
between the process station, operator station and engineering station takes place via
the system bus DigiNetS (Industrial Ethernet). user
Different transmission media (RJ45
twisted pair, thin, thick or fiber optic cables and mixed media) and network topology
can be selected for the system bus.
Simple layout, due to the use of TCP/IP protocol,
the system can also use the public telephone network (dial-up mode) or satellite to 
achieve ultra-long-distance communication.
Subsystems such as PLC communicate with the
Industrial” system through the ModBus protocol interface. The system also supports
IEC870-5 over-control protocol.
discussion.
The Flash EPROM inside the PS provides more
than 220 functional modules (control algorithm subroutines), in addition to the basic
ones specified in the IEC 61131 3 standard
In addition to this content, many powerful
