VE4005S2B1
VE4005S2B1
VE4005S2B1
ABB Ability™
·ABB Ability™ EDCS智能配电控制系统
·ABB Ability™ 配电系统资产健康管理解决方案
低压产品
断路器产品
·空气断路器 – Emax 2
·塑壳断路器 – Tmax XT、Tmax
·塑壳断路器 – Formula
低压控制产品
接触器
·通用型接触器 – AX、AF、A、EK
·热过载继电器 – TA、TF
·电子过载继电器 – E…DU、EF
·切换电容器用接触器 – UA、UA…RA
·建筑用接触器 – ESB
·中间继电器 – NX、NF
起动器
·软起动器 – PSTX
·电动机保护用断路器 – MS
电子产品和继电器
·电子时间继电器 – CT
·电子测量和监视继电器 – CM
·插拔式接口继电器 – CR
·开关电源 – CP
机械安全产品
·安全 PLC Pluto
·安全继电器Sentry系列
·安全光幕/光栅 Orion 系列
·传感器 Eden/门锁 Magne、Dalton
按钮指示装置
network card ei801f/ei802f/ei803f
The industrial Ethernet network card provides
communication with the system network diginet s (iee802.3 Ethernet standard)
Interface.
Basic characteristics:
1ee802.3 Ethernet standard
o
Ei801f provides 10base2 thin cable
communication interface
Ei802f provides 10BASE5 thick cable connection (through AUI
interface)
Ei803f provides 10Base-T twisted pair communication interface
32-bit data bus,
100 mb/s
DMA (direct memory access) mode main memory ram, corresponding CPU operating
load <4%
Optional ram backup battery
Fieldbus interface replacement card 
fi830f/fi820f/fi810f
Fieldbus interface cards are divided into several types according
to different protocol standards. Each interface card provides – a fieldbus interface
(PROFIBUS,
Can, FF, MODBUS, etc.). The configuration and parameter settings of the
interface card itself and the field instrument (or remote i1/0) on the connected
fieldbus are still
It is designed by the industrial “unified tool control bui lder
without additional software. The interface card can be configured redundantly
(separated between each other
Redundant basic unit pm802f) and can be plugged in and out
and replaced online.
Fi830f: PROFIBUS DP interface card, as the master station, can
connect 126 PROFIBUS DP slave stations, and the communication rate can reach 12mbd
One
PS can plug in 4 fieldbus interfaces, connect 496 fieldbus devices, and one city
(subsystem) of industrial “system can
Connect 4960 fieldbus devices (10000 i/0).
Fi820f:
two serial interfaces are provided to connect the serial protocol equipment. The
maximum transmission rate is 38.4kbd and can be configured. Its Standards Association
Modbus Different physical interfaces can be selected for different connection schemes,
RS422, RS485, RS232. All interfaces are electrical isolation
Away. And the redundant
operation is realized by two redundant field controllers.
Fi8i0f card is a triple can
bus protocol interface card (rate 1mbd) used to connect industrial ial “conventional
process control station
The i/0 protection unit of the PS is used to receive process
signals from the rack mounted i/0 modules supported by the PS. Each field controller PS
can only be configured
-Block fi810f card. — The two fi810f interface cards on the
redundant PS. can be switched redundantly.
S800 and S900 are distributed i/0 for process
control stations. They communicate with their controllers through Prof ibusdp Fieldbus
Communication, which can be installed in the controland PA three levels, DP
communication rate can be as high as 12Mb. The CAN (DIN/IS011898 standard) bus
The
biggest feature is its super sturdiness and data security. The system of course also
supports Modbus. The communication with the intelligent field instrument is through
IART
protocol or field bus (31. 25Kb ProfibusPA and FF bus).
The system communication between
the operation management level and the process control level is realized by Di giNetS
network (Industrial Ethernet/IEEE802.3 standard),
Users can choose the communication
transmission medium (ordinary cable or optical fiber) and network topology according to
the actual situation of the application.
The popular PC and MS_ Windows 2000 have been
widely used in various fields all over the world, becoming the de facto standard
computer platform.
tower. The operating station 0S, the engineering station ES and the
data gateway GS of the Industrial” system use this platform to ensure the system’s
