VMIVME-3122-210
VMIVME-3122-210
VMIVME-3122-210
PanelView™ 5500 终端是通过EtherNet/IP 网络监视和控制 ControlLogix® 5570 和CompactLogix™ L1、L2 L3 控制器所连接设备的操作员界面设备。 其动画图形和文本显示便于操作员查看机器或过程的工作状态。 操作员通过终端的触摸屏或键盘与控制系统进行交互。
PanelView 5500 终端具有以下特性和功能：
• 紧密集成的控制和设计环境有助于在 PanelView 5500 终端和Logix 平台之间共享信息。
• Studio 5000® 环境为 View Designer 和 Logix Designer 应用程序提供单点访问途径。
• 可连接一个版本 27 或更高版本固件的 ControlLogix 5570 或CompactLogix L1、L2 或 L3 控制器。
• 支持多达 50 个用户自定义画面 ( 未来固件版本还将增加画面数量)。
• 支持多达 500 个基于 Logix 的报警 (未来固件版本还将增加报警数量)。
• 支持设备级环网 (DLR)、线性或星型网络拓扑结构的以太网通信。
• 高速人机界面 (HMI) 按钮控件和配置简便的导航菜单。
PanelView 5500 终端
产品目录号 2715-T7CD、2715-T7CD-B、2715-T7CA、2715-T7CA-B、2715-B7CD、2715-B7CD-B、2715-B7CA、2715-B7CA-B、2715-T9WD、2715-T9WD-B、2715-T9WA、2715-T9WA-B、2715-T10CD、2715-T10CD-B、2715-T10CA、2715-T10CA-B、2715-B10CD、2715-B10CD-B、2715-B10CA、2715-B10CA-B、2715-T12WD、2715-T12WD-B、2715-T12WA、2715-T12WA-B、2715-T15CD、2715-T15CD-B、2715-15CA、2715-15CA-B、2715-B15CD、2715-B15CD-B、2715-B15CA、2715-B15CA-B、2715-T19CD、2715-T19CD-B、2715-T19CA、2715-T19CA-B
Can, etc.
International standard fieldbus, Profibus is the most widely used open fieldbus international standard in the world, divided into FMS, DP and PA
Level 3, DP communication rate can be as high as 12Mb. Profibus is used to connect intelligent devices such as distributed I/0 stations and field bus instruments.
Communication between the process station, operator station and engineering station takes place via the system bus DigiNetS (Industrial Ethernet). user
Different transmission media (RJ45 twisted pair, thin, thick or fiber optic cables and mixed media) and network topology can be selected for the system bus.
Simple layout, due to the use of TCP/IP protocol, the system can also use the public telephone network (dial-up mode) or satellite to achieve ultra-long-distance communication.
Subsystems such as PLC communicate with the Industrial” system through the ModBus protocol interface. The system also supports IEC870-5 over-control protocol.
discussion.
The Flash EPROM inside the PS provides more than 220 functional modules (control algorithm subroutines), in addition to the basic ones specified in the IEC 61131 3 standard
In addition to this content, many powerful and rigorously tested function blocks from actual engineering applications have been expanded. any complex control
The scheme can be realized by the combination of these function blocks.
The function blocks provided by the system mainly include the following categories:
o
Analog processing
o
digital processing
loop regulation
Logical sequence control
c
logic operation
Monitoring function
Collection function.
c
arithmetic operations
c
TCP/IP protocol communication interface
Modbus protocol communication interface
1EC870-5 protocol communication interface (Telecontrol)
4.2 Field Controller PS
Industrial” field controller PS is a special process control station, which is embedded with field bus communication interface for users to use
Fieldbus technology offers very flexible options. Each PS allows to insert 4 fieldbus interface cards (the card type can be
