IS200TDBTH6A(CD)
IS200TDBTH6A(CD)
IS200TDBTH6A(CD)
FDNA-01 DeviceNet 适配器模块是用来将ABB传动接入DeviceNet网络的可选设备。在DeviceNet 网络中，传动单元是一个从站点。通过FDNA-01 DeviceNet 适配器模块可以实现下列功能：
• 向传动单元发出控制命令( 起动、停止、运行允许等)
• 向传动单元发送电机转速或转矩给定值
• 给出传动的一个过程实际值或PID 控制器的过程给定值
• 从传动单元读取状态信息和实际值
• 修改传动参数值
• 对传动故障进行复位
abb patent)
16 K internal cache (CPU cache RAM)
Ram backup battery (matchdog, optional redundancy)
Equipment internal temperature monitoring
Watchdog
I/0 sweeping cycle: configurable.
Time required to process 1000 IL (instructions):
< 1.0 ms (processing binary and 16 bit arithmetic instructions)
<2ms (processing fixed-point arithmetic instructions)
< 1.5ms (processing 32-bit floating-point arithmetic instructions)
Bthernet network card ei801f/ei802f/ei803f
The industrial Ethernet network card provides communication with the system network diginet s (iee802.3 Ethernet standard)
Interface.
Basic characteristics:
1ee802.3 Ethernet standard
o
Ei801f provides 10base2 thin cable communication interface
Ei802f provides 10BASE5 thick cable connection (through AUI interface)
Ei803f provides 10Base-T twisted pair communication interface
32-bit data bus, 100 mb/s
DMA (direct memory access) mode main memory ram, corresponding CPU operating load <4%
Optional ram backup battery
Fieldbus interface replacement card fi830f/fi820f/fi810f
Fieldbus interface cards are divided into several types according to different protocol standards. Each interface card provides – a fieldbus interface (PROFIBUS,
Can, FF, MODBUS, etc.). The configuration and parameter settings of the interface card itself and the field instrument (or remote i1/0) on the connected fieldbus are still
It is designed by the industrial “unified tool control bui lder without additional software. The interface card can be configured redundantly (separated between each other
Redundant basic unit pm802f) and can be plugged in and out
