IS200SCTLG1A
IS200SCTLG1A
IS200SCTLG1A
施耐德电气Harmony®XB5R无线免电池按钮可通过按钮(发射器)实现对继电器(接收器)的无线远程控制。该控制通过无线电信号传输实现：无线按钮内装有类似“发电机”原理的信号发生器，该发生器可将按下按钮时产生的机械能转换为电能。通过单次脉冲形式，将一个带有唯一ID编码的无线电编码信号发送到几十米外的一个或多个接收器上。也可以使用多个不同的发射器控制一个接收器。
根据应用环境，也可通过使用中继天线绕过阻碍信号传输的障碍物，或者扩大无线控制距离。
发射器和接收器之间的有效距离(1)约为：
·100 m，无障碍物遮蔽；
·25 m，接收器安装在金属建筑物内或封闭金属控制柜内；
·40m，发射器和接收器之间安装有中继天线。(接收器安装在金属建筑物内或封闭金属控制柜内)。
该 产品通过完全省去按钮和电气柜之间的接线和相关设备，大大减少了安装时间和物料成本。同时，该新技术允许操作者在自由移动中进行控制，或在运输设备中进行移动控制(卡车、电车、搬运车等)。而且无需维护(不需电池)，进一步为客户节约成本，并杜绝废旧电池带来的环境污染。
该产品适用于多种应用场合，包括工业设备控制(生产线、输送带等)和建筑应用，以及基础设施控制(照明、开门装置、风扇启动装置等)。
此技术(单脉冲式无线电编码发送)不适用于起重应用控制(“上下”，“前后”、“左右”等)或安全应用场合(紧急停止等)。对于这类应用，推荐使用Harmony® XB4、XB5或XAC系列悬挂式按钮盒。
standard of IEC61131-3, and has
There are high-performance graphics editing functions:
– Function Block Diagram (FBD)
-Ladder Diagram (LD)
– Instruction List (IL)
– Sequence Control Chart (SFC)
. Structured Text (ST)
●Extensive function block library, user-defined function blocks can also be added
Added to it, the macro library and graphic symbols can be customized for the user.
Blocks can create graphics and operator panels.
●Any standard can be integrated by means of GSD file import
PROFIBUS-DP and PA devices, and through user-defined pairing
dialog box to design the configuration window for these devices.
●Profibus field controller can be integrated through FDT/DTM technology
line equipment
system structure
The Freelance 800F process control system is divided into operator levels
and process control level. The operator level contains controls for operation and display.
Archiving and logging, trending and alarming functions. Controller executes open loop
and closed loop control function.
Freelance 800F DigiVis Operator Level
DigiVis operator stations use PC hardware, either standard commercial
Business PCs can also be industrial-grade PCs and run on Micro-
under soft Windows operating system. DigiVis supports dual-screen display operation
operating technology, that is to say, two operations can be performed using one PC
station and operate with a mouse and a keyboard.
Operator level can install one engineering station and several operators
stand. ControlBuilderF engineering station configures and adjusts the system
Mode. Usually, we can use portable devices such as notebooks to
The system is now configured in the office and on site. Operator-level PC
Can also be used as an engineer station. Engineer standing during system uptime
Intervals can be closed without a permanent connection to the system.
Freelance 800F Process Control Stage
At the process control level, the Freelance 800F system can be controlled by
It consists of a number of process control stations connected to I/O units. you can choose this
Some process stations are in redundant mode (CPU redundancy, fieldbus module redundancy
redundant) or non-redundant mode. Modular pluggable input/output modules
Blocks are freely selected
