SST-PFB-CLX
SST-PFB-CLX
SST-PFB-CLX
VSC真空接触器采用ABB驰名的真空灭弧室和永磁操动机构，可用于交流系统中的正常操作，尤其适用于频繁操作的场合，例如：三相电动机，变压器，电容器和电阻等负载，也可应用于马达正反转回路，其主要特点如下：
• 卓越性能的全球通用产品
• 丰富的运行经验，满足客户不同需求
• 原装德国ABB真空灭弧室，高可靠性
• 双稳态永磁操动机构，性能稳定，使用寿命长
• 100万次机械寿命试验验证
• 节能低碳的制造、运行和回收过程，环境友好EK6系列接地开关仅适用于户内的电气设备，符GB/T1985、DIN VDE0670第二部分和标准IEC 62271-102：2001。并配有快速合闸机构，能够快速合闸。导体的尺寸设计能够承受额定短时短路电流通过，快速合闸操作不受控制。接地开关除了预先装配好的部分还附有备装零件和匹配的接地软铜绞线，正确地将这些零部件安装在开关柜上，以能完全实现接地开关通断保护功能。开关是依据GB/T 1985、DIN VDE0670第二部分和IEC 62271-102：2001的相关部分规定进行检查，完全合格。
be expanded. The hardware of the system control station is encapsulated in an all-metal shell, which can withstand the most
Harsh industrial environment. The device can be installed either in a cabinet or on a wall. System complies with all current EMC standards and is CE marked
Chi.
Industrial” DCS system design purpose: the most economical engineering investment, the most powerful control function.
Five features of Industria1″ DCS system:
1. All-round integrated control system, integrating DCS & PLC & Field Bus;
2. Using RISC SuperScalar high-speed CPU, with super performance;
Three high reliability, strict industrial application practice, more than 1000 sets of application performance in China;
4. It has good openness, flexibility and scalability;
Fifth, the project is easy, the interface is friendly, and the maintenance is simple;
2. Industria1″ system communication
Industrial” system uses international standard industrial bus. Field controller supports Profibus, FF, ModBus, Can, etc.
International standard fieldbus, Profibus is the most widely used open fieldbus international standard in the world, divided into FMS, DP and PA
Level 3, DP communication rate can be as high as 12Mb. Profibus is used to connect intelligent devices such as distributed I/0 stations and field bus instruments.
Communication between the process station, operator station and engineering station takes place via the system bus DigiNetS (Industrial Ethernet). user
Different transmission media (RJ45 twisted pair, thin, thick or fiber optic cables and mixed media) and network topology can be selected for the system bus.
Simple layout, due to the use of TCP/IP protocol, the system can also use the public telephone network (dial-up mode) or satellite to achieve ultra-long-distance communication.
Subsystems such as PLC communicate with the Industrial” system through the ModBus protocol interface. The system also supports IEC870-5 over-control protocol.
discussion.
The Flash EPROM inside the PS provides more than 220 functional modules (control algorithm subroutines), in addition to the basic ones specified in the IEC 61131 3 standard
In addition to this content, many powerful and rigorously tested function blocks from actual engineering applications have been expanded. any complex control
The scheme can be realized by the combination of these function blocks.
The function blocks provided by the system mainly include the following categories:
o
Analog processing
o
digital processing
loop regulation
Logical sequence control
c
logic operation
Monitoring function
Collection function.
c
arithmetic operations
c
TCP/IP protocol communication interface
Modbus protocol communication interface
1EC870-5 protocol
