ELAU ISH100/30025/0/0/00/0/00/01/00

SafeRing/SafePlus 40.5适用于以下使用场所：
• 紧凑型二次变电所
• 小型工矿企业
• 风力发电厂
• 酒店、商场、办公楼、商业中心等
SafeRing/SafePlus 40.5的不锈钢气室内部充满了SF6气体，将所有带电部件与开关完全密封，与外界隔绝。这种全密封系统使内部开关和所有带电部分不受外部环境变化的影响 SafeRing / SafePlus Air中压干燥空气绝缘环网柜及开关柜, 12 kV, 630A
SafeRing / SafePlus Air是ABB公司推出的环保型气体绝缘环网柜及开关柜，具有环保性能好，可靠性及安全性能高，结构紧凑，免维护等特点。

采用干燥空气作为绝缘介质，干燥空气是一种常用的工业气体，客户不需进行维护及回收。在设备运行过程中出现泄露，不会对环境有任何影响。

SafeRing / SafePlus Air最大程度的继承了现有气体绝缘开关柜成熟的生产工艺和运行经验，能够最大程度的保证产品稳定可靠的运行。

具有较好的环境适应性，可应用于风沙、潮湿、污秽等工业环境中；多个功能单元可密封在同一个气室内，使得结构更紧凑，现场安装工作量更少。

SafeRing / SafePlus Air可集成配电自动化功能，满足智能电网的需求。

80960HT25/75

32-bit RISC superscalar processor with operation speed of 150 MIPS

4 MB FLASH-EPROM

EEPROM，serial， 16 Kbit

Ram 8 MB (with error check and correction function, abb patent)

16 K internal cache (CPU cache RAM)

Ram backup battery (matchdog, optional redundancy)

Equipment internal temperature monitoring

Watchdog

I/0 sweeping cycle: configurable.

Time required to process 1000 IL (instructions):

< 1.0 ms (processing binary and 16 bit arithmetic instructions)

<2ms (processing fixed-point arithmetic instructions)

< 1.5ms (processing 32-bit floating-point arithmetic instructions)

Bthernet network card ei801f/ei802f/ei803f

The industrial Ethernet network card provides communication with the system network diginet s (iee802.3 Ethernet standard)

Interface.

Basic characteristics:

1ee802.3 Ethernet standard

Ei801f provides 10base2 thin cable communication interface

Ei802f provides 10BASE5 thick cable connection (through AUI interface)

Ei803f provides 10Base-T twisted pair communication interface

32-bit data bus, 100 mb/s

DMA (direct memory access) mode main memory ram, corresponding CPU operating load <4%

Optional ram backup battery

Fieldbus interface replacement card fi830f/fi820f/fi810f

Fieldbus interface cards are divided into several types according to different protocol standards. Each interface card provides – a fieldbus interface (PROFIBUS,

Can, FF, MODBUS, etc.). The configuration and parameter settings of the interface card itself and the field instrument (or remote i1/0) on the connected fieldbus are still

It is designed by the industrial “unified tool control bui lder without additional software. The interface card can be configured redundantly (separated between each other

Redundant basic unit pm802f) and can be plugged in and out and replaced online.

Fi830f: PROFIBUS DP interface card, as the master station, can connect 126 PROFIBUS DP slave stations, and the communication rate can reach 12mbd

One PS can plug in 4 fieldbus interfaces, connect 496 fieldbus devices, and one city (subsystem) of industrial “system can

Connect 4960 fieldbus devices (10000 i/0).

Fi820f: two serial interfaces are provided to connect the serial protocol equipment. The maximum transmission rate is 38.4kbd and can be configured. Its Standards Association

Modbus Different physical interfaces can be selected for different connection schemes, RS422, RS485, RS232. All interfaces are electrical isolation

Away. And the redundant operation is realized by two redundant field controllers.

Fi8i0f card is a triple can bus protocol interface card (rate 1mbd) used to connect industrial ial “conventional process control station

The i/0 protection unit of the PS is used to receive process signals from the rack mounted i/0 modules supported by the PS. Each field controller PS can only be configured

-Block fi810f card. — The two fi810f interface cards on the

ELAU ISH100/30025/0/0/00/0/00/01/00

相关内容