IC697BEM731Z
IC697BEM731Z
IC697BEM731Z
三菱MELSERVO-J3系列通用AC伺服具有比现有的MELSERVO-J2-Super系列产品更高的性能和更强的功能。
MR-J3-B伺服放大器通过高速同步网络与伺服系统控制器连接，并通过直接读取定位数据进行操作。利用指令模块的数据执行伺服电机的转速／方向控制和高精度定位。与现有的SSCNET相比，通过采用光通讯系统，连接MR-J3-B伺服放大器的SSCNETⅢ大大提高了通讯速度和噪声误差。对于接线距离，两极之间的距离最长可以达到50米。为了保护主电路的功率晶体管不会受到快速加／减速或过载引起的过流的影响，伺服放大器具有夹紧( clamping)转矩限制电路。此外，转矩限制值可以通过参数进行设置。由于此新的系列具有USB通讯功能，
可以利用安装在个人计算机上的伺服设置软件进行参数设置，试运行，状态显示监控，增益调整等。利用实时自动调谐，可以根据机器自动调整伺服增益。MELSERVO-J3系列伺服电机具有分辨率为262144 pulses/rev的绝对位置编码器，相比MELSERVO-J2-Super系列，能够实现更精确的控制。简单地在伺服放大器上增加一个电池就可以构成一个绝对位置检测系统。通过设置一次原点位置，在电源接通或报警出现时不需要进行原点回归。
operating parameters
c
complete self-diagnosis
Compact and robust design
Front Panel Wiring
DIN rail (U-shaped) installation well can be directly wall mounted, simple and convenient
o
Allowable operating ambient temperature…60 C, with automatic temperature monitoring
o
EMC (Electromagnetic Compatibility) according to EN50082
mouth
Certifications: CE, NAMUR, CSA, CSA-NRT
Glossary
Process station:
This term is used to describe AC800F controllers (field controllers) and rack-mounted controllers. A process station can be designed to be redundant
configuration and non-redundant configuration.
AC800F :
This term is used to describe the AC800F Field Controller type of process station. A redundant process station consists of 2
AC800F controller.
Rack mounted process station:
This term is used to describe a rack-mounted type of process station. A redundant process station contains 2 rack-mounted CPUs.
This term is used to describe a single, non-redundant process station.
In the investment of modern automation system, due to the hardware equipment department
It only takes up less cost in the whole system, then write engineering applications
The cost of software becomes increasingly important. Generally speaking, a self
The engineering application software cost of the automation project accounts for about the entire project.
About 50%, it is not difficult to see that the migration of cost structure creates a lot of innovation for users.
Create an opportunity to optimize project investment, therefore, it is necessary to start from engineering programming
Think about lowering costs in the first place!
This is what we developed the Freelance 800F system for:
Keeping hardware prices consistent with those of programmable logic controllers
In this way, cost efficiency can be improved by reducing user engineering costs.
How the Freelance 800F process control system helps users reduce
Low engineering cost?
●By using a complete engineering tool (Control Builder
F) to configure the entire control system, including automation functions
function, operator interface display and logging, and configuration of the fieldbus.
equipment (PROFIBUS, FOUNDATION Fieldbus,
HART, etc.) and device parameter settings.
● Automatic generation of global data between the process control station and the operator station
According to communication.
For field devices, process control stations and operator stations, a unified global database is used for the entire control system, thereby reducing
cost and time investment in establishing data communication and interactive access.
And ensure the consistency of data throughout the system.
●Provide system-wide unified inspection
