FI820F 3BDH000031R1
FI820F 3BDH000031R1
FI820F 3BDH000031R1
FX2N-10PG脉冲输出模块（以后简称为FX2N-10PG，脉冲输出模块或是PGU）是最大输出1MHz脉冲列并且驱动单轴的步进电机和伺服电机的特殊模块。
1、每个FX2N-10PG单元元对一台单轴步进电机或是伺服电机进行位置控制。
2、通过使用FROM/TO指令对所连接的FX2N或是FX2NC系列PLC进行数据读写。
3、最大可以输出1MHz的脉冲列。（差分线驱动器输出）
Wiring
DIN rail (U-shaped) installation well can be directly wall mounted, simple and convenient
o
Allowable operating ambient temperature…60 C, with automatic temperature monitoring
o
EMC (Electromagnetic Compatibility) according to EN50082
mouth
Certifications: CE, NAMUR, CSA, CSA-NRT
Glossary
Process station:
This term is used to describe AC800F controllers (field controllers) and rack-mounted controllers. A process station can be designed to be redundant
configuration and non-redundant configuration.
AC800F :
This term is used to describe the AC800F Field Controller type of process station. A redundant process station consists of 2
AC800F controller.
Rack mounted process station:
This term is used to describe a rack-mounted type of process station. A redundant process station contains 2 rack-mounted CPUs.
This term is used to describe a single, non-redundant process station.
In the investment of modern automation system, due to the hardware equipment department
It only takes up less cost in the whole system, then write engineering applications
The cost of software becomes increasingly important. Generally speaking, a self
The engineering application software cost of the automation project accounts for about the entire project.
About 50%, it is not difficult to see that the migration of cost structure creates a lot of innovation for users.
Create an opportunity to optimize project investment, therefore, it is necessary to start from engineering programming
Think about lowering costs in the first place!
This is what we developed the Freelance 800F system for:
Keeping hardware prices consistent with those of programmable logic controllers
In this way, cost efficiency can be improved by reducing user engineering costs.
How the Freelance 800F process control system helps users reduce
Low engineering cost?
●By using a complete engineering tool (Control Builder
F) to configure the entire control system, including automation functions
function, operator interface display and logging, and configuration of the fieldbus.
equipment (PROFIBUS, FOUNDATION Fieldbus,
HART, etc.) and device parameter settings.
● Automatic generation of global data between the process control station and the operator station
According to communication.
For field devices, process control stations and operator stations, a unified global database is used for the entire control system, thereby reducing
cost and time investment in establishing data communication and interactive access.
And ensure the consistency of data throughout the system.
●Provide system-wide unified inspection of user applications, overriding
from process control stations, operator stations to intelligent field devices, including
Including the integrity and consistency check of
