350015BENTLY
350015BENTLY
350015BENTLY
三菱 FX1S系列微型PLC输入输出合计点数有10、14、20、30点等4种（不可以进行输入输出扩展）。
内置2个用于调整定时器设定时间的模拟电位器。如果装上FX1N-8AV-BD形模拟电位器选件时，可追加到8个。
按照标准，内置2K步的EEPROM（不需电池）也可使用选件FX1N-EEPROM-8L式存储盒（内置8K步：用FX1S可使用2K步）进行程序的读出／写入。 三菱 FX1N系列微型PLC输入输出扩展设备最大可扩展至128点，扩展模快或扩展单元只可以使用FXON系列和FX2N系列，另外也可和FXON-3A. FX2N-16LINK-M．FX2N-32CCL连接。
内置2个用于调整定时器设定时间的模拟电位器。(模拟电位器的值放入D8030、D8031)如果装上FX1N-8AV-BD形模拟电位器选件时．可追加到8个。
outputs also support redundant operation.
The data communication between the field process controller PS. operating station 0s and the engineer station es is completed by the system network (diginets), which is inserted
The – Ethernet network card on the PS basic unit provides the interface between PS and diginets. ES. Hardware configuration and PS
The user program is downloaded to the PS CPU through diginets and the first network card. After the field bus interface card is newly installed or replaced, the required group
The status information will be automatically reloaded. The configuration results and real-time process data are stored in RAM, and ram is installed on the Ethernet network card or battery card
The backup battery can maintain the configuration content and data in case of power failure.
Basic unit pmbo2f characteristics:
mouth
Installation slots of 4 fieldbus interface cards
c
Installation slot of 2 Ethernet network cards
Support redundant operation of Fieldbus interface card
Support hot plug of Fieldbus interface card
Technical indicators of basic unit pib02f:
CPU :Intel 80960HT25/75
32-bit RISC superscalar processor with operation speed of 150 MIPS
4 MB
