IC693CPU374
IC693CPU374
IC693CPU374
可编程控制器产品
■ Zelio Logic 逻辑控制器
■ Twido 可编程控制器
接线系统及分布式I/O
■ Advantys ABE7/ABE9 预接线系统
■ Advantys OTB/FTB/FTM 分布式I/O
■ Advantys AS-i 智能接线系统
测量及控制继电器
■ Zelio Time RE 时间继电器
■ Zelio Control RM4 控制继电器
■ Zelio Count XBK 计数器
可插拨式中间继电器
■ Zelio Relay RXM 小型中间继电器
■ Zelio Relay RSB 接口型中间继电器
■ Zelio Relay RUM 通用型中间继电器
■ Zelio Relay RPM/RPF 功率型中间继电器
接线端子及管状端头
■ AB1VV/AB1RR/AB1AA 接线端子
■ DZ5/AE5/AT1 绝缘管状端头及附件
开关电源及隔离变压器
■ Phaseo ABL1/ABL7 开关电源
■ Phaseo ABL6 安全隔离变压器
following components:
Basic unit pm802f
Power supply sa801f/sd802f
o
Ethernet network card carithmetic instructions)
Bthernet network card ei801f/ei802f/ei803f
The industrial Ethernet network card provides communication with the system network diginet s (iee802.3 Ethernet standard)
Interface.
Basic characteristics:
1ee802.3 Ethernet standard
o
Ei801f provides 10base2 thin cable communication interface
Ei802f provides 10BASE5 thick cable connection (through AUI interface)
Ei803f provides 10Base-T twisted pair communication interface
32-bit data bus, 100 mb/s
DMA (direct memory access) mode main memory ram, corresponding CPU operating load <4%
Optional ram backup battery
Fieldbus interface replacement card fi830f/fi820f/fi810f
Fieldbus interface cards are divided into several types according to different protocol standards. Each interface card provides – a fieldbus interface (PROFIBUS,
Can, FF, MODBUS, etc.). The configuration and parameter settings of the interface card itself and the field instrument (or remote i1/0) on the connected fieldbus are still
It is designed by the industrial “unified tool control bui lder without additional software. The interface card can be configured redundantly (separated between each other
Redundant basic unit pm802f) and can be plugged in and out and replaced online.
Fi830f: PROFIBUS DP interface card, as the master station, can connect 126 PROFIBUS DP slave stations, and the communication rate can reach 12mbd
One PS can plug in 4 fieldbus interfaces, connect 496 fieldbus devices, and one city (subsystem) of industrial “system can
Connect 4960 fieldbus devices (10000 i/0).
Fi820f: two serial interfaces are provided to connect the serial protocol equipment. The maximum transmission rate is 38.4kbd and can be configured. Its Standards Association
Modbus Different physical interfaces can be selected for different connection schemes, RS422, RS485, RS232. All interfaces are electrical isolation
Away. And the redundant operation is realized by two redundant field controllers.
Fi8i0f card is a triple can bus protocol interface card (rate 1mbd) used to connect industrial ial “conventional process control station
The i/0 protection unit of the PS is used to receive process signals from the rack mounted i/0 modules supported by the PS. Each field controller PS can only be configured
-Block fi810f card. — The two fi810f interface cards on the redundant PS. can be switched redundantly.
S800 and S900 are
