1326AB-B520E-M2L
1326AB-B520E-M2L
1326AB-B520E-M2L
描述如何为 Fipio 总线上的 Momentum 通讯器安装软硬件。
Fipio 是用于 Premium 7 系列或 1000 系列 PLC 的现场总线。它允许分散 PLC工作站及其最靠近工作组件的工业外设的输入/ 输出。
在 Fipio 上，循环变量用于更新 PLC 循环周期的远程输入/ 输出的状态。在所有与配置、调整、诊断和操作员对话相关的功能中都用到了变量和非周期性消息处理。
使用 Fipio 现场总线开发项目并不需要特殊的知识。设计人员只需在软件中声明连接到该总线的设备，与声明机架上的输入/ 输出模块类似。Unity Pro 软件自动生成网络操作参数，此参数随后被加载到 PLC 中。相互有链接关系的屏幕可带领操作员对连接到总线的设备执行配置和调整功能。
如果编程终端连接到重写地址点 63，则它只能访问 Premium 总线主站和代理PLC。在现场总线上连接端子或断开端子连接都不影响总线正常工作。
current EMC standards and has CE standards
Annals.
Industrial “DCS system design purpose: the most economical engineering investment and the most powerful control function.
Industria1 “five features of DCS system:
1、 The comprehensive control system integrates DCS & PLC & field bus;
2、 RISC superscalar high-speed CPU with super performance;
3. High reliability, strict industrial application practice, and application performance of more than 1000 sets in China;
4、 Good openness, flexibility and expansibility;
5、 Easy engineering, friendly interface and simple maintenance;
2. Industria1 “system communication
Industrial ial “the system uses the international standard industrial bus. The field controller supports PROFIBUS, FF, MODBUS, can and other countries
International standard fieldbus, PROFIBUS is the most widely used open fieldbus international standard in the world, which is divided into FMS, DP and pa
Level III, DP communication rate can be up to 12MB. PROFIBUS is used to connect distributed i/0 stations, field bus instruments and other intelligent devices.
The communication among process station, operator station and engineer station is realized through the system bus diginets (Industrial Ethernet). user
Different transmission media (RJ45 twisted pair, thin cable, thick cable or optical fiber cable and mixed media) and network topology can be selected for the system bus
Due to the adoption of tcp/ip protocol, the system can also realize ultra long distance communication with the help of public telephone network (dial-up mode) or satellite.
PLC and other subsystems communicate with industrial “system throug
h Modbus protocol interface. The system also supports iec870-5 over control coordination
Discussion.
The flash EPROM inside PS provides more than 220 function modules (control algorithm subroutines), in addition to the base specified in IEC 61131 3 standard
In addition to this content, many powerful and strictly tested function blocks from practical engineering applications are also expanded. Any complex control
All schemes can be realized by the combination of these function blocks.
The function blocks provided by the system mainly fall into the following categories:
o
Analog quantity processing
o
Digital quantity processing
Loop adjustment
Logical sequence control
c
Logical operation
Monitoring function
Acquisition function
c
Arithmetic operation
c
Tcp/ip protocol communication interface
Modbus protocol communication interface
1ec870-5 protocol communication interface (telecontrol)
4.2 field controller PS
Industrial ial “field controller PS is a special process control station, which is embedded with a fieldbus communication interface for users to use
Fieldbus technology
