LID43.03
LID43.03
LID43.03
施耐德NG125 系列高分断小型断路器产品目录（中文）
NG125系列包括NG125H (36 kA) 和NG125L (50 kA) 两种分断能力的断路器及其配置附件。可以用于大功率配电柜的出线侧直接保护负载，或作为分配电柜的主进线开关。NG125 系列高分断小型断路器基于全新技术平台，使强大功能与紧凑体积融为一体，单极宽度为27mm，体积小于其它同等分断能力的断路器，在额定电压下，最高分断能力高达50 kA。
NG125 系列高分断小型断路器产品齐全，系列完整，可提供多种解决方案
·断路器分断能力： 36 kA；50 kA
·电流等级：10 A～80A
·脱扣曲线：C，D
·极数：1P～4P
·附件：剩余电流动作保护附件，电气附件，机械附件
Simple engineering: configuration, commissioning and diagnostics using only the same tool CBF (Control Build F) software
mouth
Access to all information from the field including equipment management information
Global database of fieldbus devices, control levels and HMI (Human Machine Interface) usage systems
Module identification with production operating parameters
c
complete self-diagnosis
Compact and robust design
Front Panel Wiring
DIN rail (U-shaped) installation well can be directly wall mounted, simple and convenient
o
Allowable operating ambient temperature…60 C, with automatic temperature monitoring
o
EMC (Electromagnetic Compatibility) according to EN50082
mouth
Certifications: CE, NAMUR, CSA, CSA-NRT
Glossary
Process station:
This term is used to describe AC800F controllers (field controllers) and rack-mounted controllers. A process station can be designed to be redundant
configuration and non-redundant configuration.
AC800F :
This term is used to describe the AC800F Field Controller type of process station. A redundant process station consists of 2
AC800F controller.
Rack mounted process station:
This term is used to describe a rack-mounted type of process station. A redundant process station contains 2 rack-mounted CPUs.
This term is used to describe a single, non-redundant process station.
In the investment of modern automation system, due to the hardware equipment department
It only takes up less cost in the whole system, then write engineering applications
The cost of software becomes increasingly important. Generally speaking, a self
The engineering application software cost of the automation project accounts for about the entire project.
About 50%, it is not difficult to see that the migration of cost structure creates a lot of innovation for users.
Create an opportunity to optimize project investment, therefore, it is necessary to start from engineering programming
Think about lowering costs in the first place!
This is what we developed the Freelance 800F system for:
Keeping hardware prices consistent with those of programmable logic controllers
In this way, cost efficiency can be improved by reducing user engineering costs.
How the Freelance 800F process control system helps users reduce
Low engineering cost?
●By using a complete engineering tool (Control Builder
F) to configure the
