TRICONEX 3301
TRICONEX 3301
TRICONEX 3301
系统工程指南适用于最终用户对自动化过程制造采用WirelessHART 自组织网状网络。遵循这些准则将帮助用户充分利用WirelessHART 系统优势。
本文档提供了有关使用WirelessHART 设备和应用的完整技术指导。所提供的信息适用于所有IEC 62591 WirelessHART 安装，独立于品牌。不包括供应商特定的” 增值” 功能。
指南的第一部分涉及从评估（概念设计）阶段到Pre FEED （前期工程设计准备）、FEED、到执行和运行阶段的项目执行中使用WirelessHART 技术。第II 部分描述了包括WirelessHART 网络的现场网络组件。
指南描述了WirelessHART 系统的功能和能力，网络和备用操作模式，以及系统访问和使用的分步步骤。本文档假定读者熟练使用HART® 仪表。因此，它集中于针对WirelessHART系统方面介绍。除非另有说明，否则读者应该假定HART和WirelessHART 仪表的项目阶段和步骤相同。
本指南总结了为项目顺利执行所包含的WirelessHART 技术所必要的基本先决条件和一般准则。该指南适用于小型和大型项目技术指南仅供能够遵守设备手册中的安全说明的合格人员使用。本文档仅以” 原样” 提供，可能会在未经通知的情况下进行未来修订。作者和贡献者对本文档中的缺陷，错误或遗漏或人员使用或依赖本文档而导致或导致的任何损失或损害概不负责。
play
(plug & play) and can be plugged in and out with power.
The field controller PS has the following features:
o
Flexible: it supports all international standard open fieldbus and can be mixed
4 high-speed fieldbuses can be connected at the same time (max. 12 MBD)
Simple project: only use the same tool CBF (control build f) software for configuration, debugging and diagnosis
mouth
Access to all information from the site, including equipment management information
Global database of Fieldbus equipment, control level and HMI (human-machine interface)
Module identification with production operating parameters
c
Complete self diagnosis
Compact and rugged design
Front panel wiring
DIN rail (U-shaped) mounting well can be directly installed on the wall, which is simple and convenient
o
Allowable operating ambient temperature 60 C, automatic temperature monitoring
o
EMC (electromagnetic compatibility) conforms to en50082 standard
mouth
Certification: CE, Namur, CSA, csa-nrtl, FM class 1 div2, ghost, Lloyd
Installation area: Class 1 div 2
The PS supports the following types of fieldbus standards:
Profibus DP，up to 12 MBd
Modbus RTU，1200 to 38. 4KBd
Industrial” CAN I/0 Bus
o
Open CAN -Bus，up to 1 MBd
o
Foundation Fieldbus H1
up to 31. 25KBd
Foundation Fieldbus H2 (fast Ethernet)
HART
The system allows different types of field buses to be mixed and run simultaneously in the same field controller PS.
Industrial “field control explosion (AC800F) consists of the following components:
Basic unit pm802f
Power supply sa801f/sd802f
o
Ethernet network card carithmetic instructions)
Bthernet network card ei801f/ei802f/ei803f
The industrial Ethernet network card provides communication with the system network diginet s (iee802.3 Ethernet standard)
Interface.
Basic characteristics:
1ee802.3 Ethernet standard
o
Ei801f provides 10base2 thin cable communication interface
Ei802f provides 10BASE5 thick cable connection (through AUI interface)
Ei803f provides 10Base-T twisted pair communication interface
32-bit data bus, 100 mb/s
DMA (direct memory access) mode main memory ram, corresponding CPU operating load <4%
Optional ram backup battery
Fieldbus interface replacement card fi830f/fi820f/fi810f
Fieldbus interface cards are divided into several types according to different protocol standards. Each interface card provides – a fieldbus interface (PROFIBUS,
Can, FF, MODBUS, etc.). The configuration and parameter settings of the interface card itself and the field instrument
