XTB750B01
XTB750B01
XTB750B01
施耐德NG125 系列高分断小型断路器产品目录（中文）
NG125系列包括NG125H (36 kA) 和NG125L (50 kA) 两种分断能力的断路器及其配置附件。可以用于大功率配电柜的出线侧直接保护负载，或作为分配电柜的主进线开关。NG125 系列高分断小型断路器基于全新技术平台，使强大功能与紧凑体积融为一体，单极宽度为27mm，体积小于其它同等分断能力的断路器，在额定电压下，最高分断能力高达50 kA。
NG125 系列高分断小型断路器产品齐全，系列完整，可提供多种解决方案
·断路器分断能力： 36 kA；50 kA
·电流等级：10 A～80A
·脱扣曲线：C，D
·极数：1P～4P
·附件：剩余电流动作保护附件，电气附件，机械附件Twido系列的一体型可编程控制器以紧凑的结构(总尺寸为80/157 x 90 x 70 mm)为用户提供了一种“all-in-one（一切尽在其中）”的解决方案。有8种一体型本体控制器可选用，它们在处理能力和直流24V输入以及继电器和晶体管输出的数量（10个、16个、24个或40个I/O）方面有所区别。
这些本体控制器使用：
口一个100-240之间的交流电源（可输出24VDC并为传感器提供24V的直流供电），
口或者一个19.2-30V的直流电源（必须为传感器提供一个外接的辅助电源）
following features:
o
Flexible: it supports all international standard open fieldbus and can be mixed
4 high-speed fieldbuses can be connected at the same time (max. 12 MBD)
Simple project: only use the same tool CBF (control build f) software for configuration, debugging and diagnosis
mouth
Access to all information from the site, including equipment management information
Global database of Fieldbus equipment, control level and HMI (human-machine interface)
Module identification with production operating parameters
c
Complete self diagnosis
Compact and rugged design
Front panel wiring
DIN rail (U-shaped) mounting well can be directly installed on the wall, which is simple and convenient
o
Allowable operating ambient temperature 60 C, automatic temperature monitoring
o
EMC (electromagnetic compatibility) conforms to en50082 standard
mouth
Certification: CE, Namur, CSA, csa-nrtl, FM class 1 div2, ghost, Lloyd
Installation area: Class 1 div 2
The PS supports the following types of fieldbus standards:
Profibus DP，up to 12 MBd
Modbus RTU，1200 to 38. 4KBd
Industrial” CAN I/0 Bus
o
Open CAN -Bus，up to 1 MBd
o
Foundation Fieldbus H1
up to 31. 25KBd
Foundation Fieldbus H2 (fast Ethernet)
HART
The system allows different types of field buses to be mixed and run simultaneously in the same field controller PS.
Industrial “field control explosion (AC800F) consists of the following components:
Basic unit pm802f
Power supply sa801f/sd802f
o
Ethernet network card ei801f/ei802f/ei803f
o
Fieldbus interface card fi810f/fi820f/fi830f
Various accessories
The main components of the field controller PS are described below.
Basic unit pm802f
The basic unit pm802f is composed of a metal rack and a CPU motherboard. It periodically scans the data from the
The signals of the field bus sensors are processed according to the control application program configured by the user, and then the calculation results are passed
The fieldbus interface card returns the corresponding fieldbus actuator.
Two field controllers can realize controller 1:1 redundancy, and undisturbed switching between master and slave PS. Two on each PS
Ethernet network card, the second network card is used to connect the system network 
