LUD700A
LUD700A
LUD700A
ATV310L分布式变频器御捷系列变频器是针对三相电压为380V(-15%)…460V(+10%)的异步电机而设计的，功率范围是0.75kW至5.5kW。
这款变频器采用高集成度设计、其即插即用的设计理念可帮助用户节省现场布线成本及工程交付时间，其集成化的功能及宏配置特别适用于物料搬运领域中的分布式应用场合，特别是输送机和分拣机。
特性
功率范围：0.75～5.5kW
输入电压：三相交流 380V(-15%)～460V(+10%)
过电流能力：变频器额定电流的150%，持续60s
输出频率范围：0.5～400Hz
控制模式：
标准模式(优化型V/F)
高性能模式(无传感器矢量模式)
二次负载模式(U2/F)
输入/输出：4个逻辑输入/2个逻辑输出(源型)
显示器：集成7段LED显示及正转/反转/停止按钮
电机抱闸：集成电机抱闸逻辑控制，支持180V直流电机抱闸
制动单元：全系列内置制动单元
通讯方式：标配AS-i通讯协议
防护等级：IP54
环境条件：符合IEC60721-3-3，3C3与3S2
运行温度：-10～55oC (45oC不降容)
储存温度：-25～70oC
运行海拔：1000m无降容
优势
量身定制：
• 集成负荷开关、钥匙开关、I/O的一体化变频器
• 高防护等级(IP54，无需盘柜)
• 高性价比
简单易用：
• 易于接线及维护
• 节省现场工时
• 易于安装
可靠性高：
• 使用可靠的AS-i总线网络
• 设备间故障互不影响
• 抗干扰
following components:
Basic unit pm802f
Power supply sa801f/sd802f
o
Ethernet network card ei801f/ei802f/ei803f
o
Fieldbus interface card fi810f/fi820f/fi830f
Various accessories
The main components of the field controller PS are described below.
Basic unit pm802f
The basic unit pm802f is composed of a metal rack and a CPU motherboard. It periodically scans the data from the
The signals of the field bus sensors are processed according to the control application program configured by the user, and then the calculation results are passed
The fieldbus interface card returns the corresponding fieldbus actuator.
Two field controllers can realize controller 1:1 redundancy, and undisturbed switching between master and slave PS. Two on each PS
Ethernet network card, the second network card is used to connect the system network diginets), and the second network cards can be interconnected with each other to form a special
Redundant communication link (diginetr) to ensure information synchronization between master and slave PS. — However, the master PS fails, and the slave PS can quickly and undisturbed connect the replacement worker
Make. All inputs and outputs also support redundant operation.
The data communication between the field process controller PS. operating station 0s and the engineer station es is completed by the system network (diginets), which is inserted
The – Ethernet network card on the PS basic unit provides the interface between PS and diginets. ES. Hardware configuration and PS
The user program is downloaded to the PS CPU through diginets and the first network card. After the field bus interface card is newly installed or replaced, the required group
The status information will be automatically reloaded. The configuration results and real-time process data are stored in RAM, and ram is installed on the Ethernet network card or battery card
The backup battery can maintain the configuration content and data in case of power failure.
Basic unit pmbo2f characteristics:
mouth
Installation slots of 4 fieldbus interface cards
c
Installation slot of 2 Ethernet network cards
Support redundant operation of Fieldbus interface card
Support hot plug of Fieldbus interface card
Technical indicators of basic unit pib02f:
CPU :Intel 80960HT25/75
32-bit RISC superscalar processor with operation speed of 150 MIPS
4 MB FLASH-EPROM
EEPROM，serial， 16 Kbit
o
Ram 8 MB (with error check and correction function, abb patent)
16 K internal cache (CPU cache RAM)
Ram backup battery (matchdog, optional redundancy)
Equipment internal temperature
