DS200TCEBG1ACE
DS200TCEBG1ACE
DS200TCEBG1ACE
WinCC Flexible SMART V4精彩系列人机界面SMART LINE V4，采用西门子 WinCC Flexible SMART V4 进行组态编程。该软件功能强大，并完全兼容原有的SMART LINE V3版本，可实现项目的无缝移植，使您更加轻松便捷地完成工程组态。
最新的WinCC Flexible Smart V4在兼容原有功能的基础上，还支持以下新功能：
▪ 支持S7以太网和串口协议的并行通讯，对于标准Modbus RTU协议设备，支持以SMART LINE作为网关实现数据收发
▪ 全新的表格控件：支持以表格形式显示实时和历史数据
▪ 全新的诊断控件：支持屏上显示S7-200 SMART PLC的系统诊断信息
▪ 组态软件新功能：支持从S7-200 SMART PLC工程文件中自动提取变量并导入
▪ 大幅增加配方及数据记录数量
▪ 全面集成ProSave维护工具
WinCC fleYJble SMART V4操作系统要求：
• Windows 10 Pro Version 20H2（操作系统内部版本 19042.868）及更高版本（64 位）
• Windows 10 Enterprise Version 1809（操作系统内部版本 17763.1821）及更高版本（64 位）
• Windows 10 Enterprise LTSB（操作系统内部版本 17763.1821）及更高版本（64 位）
• Windows 7 Professional SP1（32 位）
• Windows 7 Enterprise SP1（32 位）
• Windows 7 Ultimate SP1（32 位）
interface
Modbus protocol communication interface
1EC870-5 protocol communication interface (Telecontrol)
4.2 Field Controller PS
Industrial” field controller PS is a special process control station, which is embedded with field bus communication interface for users to use
Fieldbus technology offers very flexible options. Each PS allows to insert 4 fieldbus interface cards (the card type can be different),
Each card is connected to 1 field bus to collect process data and diagnostic information from the bus, the interface card is easy to replace and plug and play
(Plug & Play), and can be plugged and unplugged.
The field controller PS has the following characteristics:
o
Flexible: supports all international standard open fieldbuses and can be mixed
Simultaneous connection of 4 high-speed fieldbuses (max. 12 MBd)
Simple engineering: configuration, commissioning and diagnostics using only the same tool CBF (Control Build F) software
mouth
Access to all information from the field including equipment management information
Global database of fieldbus devices, control levels and HMI (Human Machine Interface) usage systems
Module identification with production operating parameters
c
complete self-diagnosis
Compact and robust design
Front Panel Wiring
DIN rail (U-shaped) installation well can be directly wall mounted, simple and convenient
o
Allowable operating ambient temperature…60 C, with automatic temperature monitoring
o
EMC (Electromagnetic Compatibility) according to EN50082
mouth
Certifications: CE, NAMUR, CSA, CSA-NRT
Glossary
Process station:
This term is used to describe AC800F controllers (field controllers) and rack-mounted controllers. A process station can be designed to be redundant
configuration and non-redundant configuration.
AC800F :
This term is used to describe the AC800F Field Controller type of process station. A redundant process station consists of 2
AC800F controller.
Rack mounted process station:
This term is used to describe a rack-mounted type of process station. A redundant process station contains 2 rack-mounted CPUs.
This term is used to describe a single, non-redundant process station.
In the investment of modern automation system, due to the hardware equipment department
It only takes up less cost in the whole system, then write engineering applications
The cost of software becomes increasingly important. Generally speaking, a self
The engineering application software cost of the automation project accounts for about the entire project.
About 50%, it is not difficult to see that the migration of cost structure creates a lot of innovation for users.
Create an opportunity to optimize project investment, therefore, it is necessary to start from
