DS200TBQCG1AAA
DS200TBQCG1AAA
DS200TBQCG1AAA
InverterEdge软件为基于TIA PORTAL和Startdrive Openness组件的SINAMICS系列变频器提供一键配置及调试。当前版本支持的变频器有G120/G12C、G120X/G120XA、V20、S120、S210。 驱动的配置和参数设置仅通过一个Excel表格来完成。其余的工作通过本软件一键启动，自动完成。中间的可选操作通过对话框的方式，由用户选择是否执行。
支持变频器系列
·V20
·G120
·G120C
·G120C PN
·G120P
·G120D
·G120XA
·S120
·S210
InverterEdge V1.4新功能：
S120变频器一键调试：
快速调试
自动优化
S210变频器一键调试
快速调试
SuperScalar high-speed CPU, with super performance;
Three high reliability, strict industrial application practice, more than 1000 sets of application performance in China;
4. It has good openness, flexibility and scalability;
Fifth, the project is easy, the interface is friendly, and the maintenance is simple;
2. Industria1″ system communication
Industrial” system uses international standard industrial bus. Field controller supports Profibus, FF, ModBus, Can, etc.
International standard fieldbus, Profibus is the most widely used open fieldbus international standard in the world, divided into FMS, DP and PA
Level 3, DP communication rate can be as high as 12Mb. Profibus is used to connect intelligent devices such as distributed I/0 stations and field bus instruments.
Communication between the process station, operator station and engineering station takes place via the system bus DigiNetS (Industrial Ethernet). user
Different transmission media (RJ45 twisted pair, thin, thick or fiber optic cables and mixed media) and network topology can be selected for the system bus.
Simple layout, due to the use of TCP/IP protocol, the system can also use the public telephone network (dial-up mode) or satellite to achieve ultra-long-distance communication.
Subsystems such as PLC communicate with the Industrial” system through the ModBus protocol interface. The system also supports IEC870-5 over-control protocol.
discussion.
The Flash EPROM inside the PS provides more than 220 functional modules (control algorithm subroutines), in addition to the basic ones specified in the IEC 61131 3 standard
In addition to this content, many powerful and rigorously tested function blocks from actual engineering applications have been expanded. any complex control
The scheme can be realized by the combination of these function blocks.
The function blocks provided by the system mainly include the following categories:
o
Analog processing
o
digital processing
loop regulation
Logical sequence control
c
logic operation
Monitoring function
Collection function.
c
arithmetic operations
c
TCP/IP protocol communication 
