DS200DCFBG1BJB
DS200DCFBG1BJB
DS200DCFBG1BJB
西门子HMI面板可分为以下几大类：
1. 精彩面板（Smart Line）（仅限中国大陆区域）
2. 按键式面板（Key Panel）
3. 精简面板（Basic Panel）
4. 精智面板（Comfort Panel）
5. 移动面板（Mobile Planel）
SMART LINE目前有2款型号：
Smart 700 IE
Smart 1000 IE
SmartLine精彩面板通信支持以下西门子控制器（PLC）。
·串口：S7-200、S7-200 CN、Smart200；最多连接4个PLC。
·以太网：S7-200（CP243-1）、Smart200、LOGO!； 最多连接4个PLC。
注意：SmartLine产品不支持与S7-300/400通信，也不支持与S7-1200/1500通信。串口和以太网口只能使用一个 ，否则编译通不过。
installed on the wall, which is simple and convenient
o
Allowable operating ambient temperature 60 C, automatic temperature monitoring
o
EMC (electromagnetic compatibility) conforms to en50082 standard
mouth
Certification: CE, Namur, CSA, csa-nrtl, FM class 1 div2, ghost, Lloyd
Installation area: Class 1 div 2
The PS supports the following types of fieldbus standards:
Profibus DP，up to 12 MBd
Modbus RTU，1200 to 38. 4KBd
Industrial” CAN I/0 Bus
o
Open CAN -Bus，up to 1 MBd
o
Foundation Fieldbus H1
up to 31. 25KBd
Foundation Fieldbus H2 (fast Ethernet)
HART
The system allows different types of field buses to be mixed and run simultaneously in the same field controller PS.
Industrial “field control explosion (AC800F) consists of the following components:
Basic unit pm802f
Power supply sa801f/sd802f
o
Ethernet network card ei801f/ei802f/ei803f
o
Fieldbus interface card fi810f/fi820f/fi830f
Various accessories
The main components of the field controller PS are described below.
Basic unit pm802f
The basic unit pm802f is composed of a metal rack and a CPU motherboard. It periodically scans the data from the
The signals of the field bus sensors are processed according to the control application program configured by the user, and then the calculation results are passed
The fieldbus interface card returns the corresponding fieldbus actuator.
Two field controllers can realize controller 1:1 redundancy, and undisturbed switching between master and slave PS. Two on each PS
Ethernet network card, the second network card is used to connect the system network diginets), and the second network cards can be interconnected with each other to form a special
Redundant communication link (diginetr) to ensure information synchronization between master and slave PS. — However, the master PS fails, and the slave PS can quickly and undisturbed connect the replacement worker
Make. All inputs and outputs also support redundant operation.
The data communication between the field process controller PS. operating station 0s and the engineer station es is completed by the system network (diginets), which is
