5466-316 WOODWARD
5466-316 WOODWARD
5466-316 WOODWARD
Lexium 23 Plus 伺服驱动器配合BCH 伺服电机功率宽广、功能强大，能够满足多数
工业场合的需求。
●Lexium 23 Plus 伺服驱动器
□200… 255 V 单相， 0.1 到 1.5 kW
□170… 255 V 三相， 0.1 到 7.5 kW
●BCH 伺服电机
□额定功率：0.1 到7.5KW
□额定扭矩：0.3 到 48 Nm
□额定转速：1000 到3000 rpm，取决于不同的型号
Lexium 23 Plus 包括2 款伺服驱动器:Lexium 23D (I/O 型) 和Lexium 23A(CANopen 型)。其中Lexium 23D 通过标准的数字I/O 控制模式； Lexium 23A 通过Canopen 总线进行控制(Canopen 或Canmotion)。
●Lexium 23A – 功能强大的Canopen 总线驱动器
□用于实时同步位置控制的基于Canopen 协议的运动控制总线Canmotion
□兼容各种PLC open 功能块
□62.5 μs 电流环刷新时间
□2 路高速中断输入用于位置捕捉
□8 路数字输入
□4 路数字输出
□2 路模拟输入
□2 路模拟输出
●Lexium 23D – 功能强大的通用型伺服驱动器
□内置8 个运动任务
□通过脉冲、模拟量和I/O 信号控制
□高至4 Mpps 的脉冲输入
□62.5 μs 电流环刷新时间
□8 路数字输入
□4 路数字输出
□2 路模拟输入
□2 路模拟输出
Glossary
Process station:
This term is used to describe AC800F controllers (field controllers) and rack-mounted controllers. A process station can be designed to be redundant
configuration and non-redundant configuration.
AC800F :
This term is used to describe the AC800F Field Controller type of process station. A redundant process station consists of 2
AC800F controller.
Rack mounted process station:
This term is used to describe a rack-mounted type of process station. A redundant process station contains 2 rack-mounted CPUs.
This term is used to describe a single, non-redundant process station.
In the investment of modern automation system, due to the hardware equipment department
It only takes up less cost in the whole system, then write engineering applications
The cost of software becomes increasingly important. Generally speaking, a self
The engineering application software cost of the automation project accounts for about the entire project.
About 50%, it is not difficult to see that the migration of cost structure creates a lot of innovation for users.
Create an opportunity to optimize project investment, therefore, it is necessary to start from engineering programming
Think about lowering costs in the first place!
This is what we developed the Freelance 800F system for:
Keeping hardware prices consistent with those of programmable logic controllers
In this way, cost efficiency can be improved by reducing user engineering costs.
How the Freelance 800F process control system helps users reduce
Low engineering cost?
●By using a complete engineering tool (Control Builder
F) to configure the entire control system, including automation functions
function, operator interface display and 
