IS200TPROS1CBB GE
IS200TPROS1CBB GE
IS200TPROS1CBB GE
介绍 Modicon X80 计数模块 BMXEHC0200 的软硬件实施。
计数模块是标准格式模块，能够以最大频率 60 KHz 计数传感器的脉冲 (BMX EHC 0200)。
BMX EHC 0200 模块中有 2 个通道。每个通道上使用的传感器可以是：
·24 VDC 2 线接近传感器
·具有 10/30 VDC 输出和推挽输出的递增信号编码器。介绍了Modicon X80 离散量模块的软硬件实施。
安装模块的一般规则
离散量输入/输出模块诊断处理
BMX DDI 1602 输入模块
BMX DDI 1603 输入模块
BMX DDI 1604T 输入模块
BMX DDI 3203 输入模块
BMX DDI 3232 输入模块
BMX DAI 1602 输入模块
BMX DAI 1603 输入模块
BMX DAI 1604 输入模块
BMX DAI 1614/BMX DAI 16142 输入模块
BMX DAI 1615 输入模块
BMX DAI 0805 输入模块
BMX DAI 0814 输入模块
BMX DDI 3202 K 输入模块
BMX DDI 6402 K 输入模块
BMXDDO 1602静态输出模块
BMXDDO 1612静态输出模块
BMX DRA 0804T继电器输出模块
BMX DRA 0805继电器输出模块
BMXDRA0815继电器输出模块
BMX DRA 1605继电器输出模块
BMX DRC 0805继电器输出模块
BMX DDO 3202 K静态输出模块
BMX DDO 6402 K静态输出模块
BMX DAO1605三端双向可控硅输出模块
BMX DAO1615三端双向可控硅隔离型输出模块
BMX DDM 16022混合静态输入/输出模块
BMX DDM 16025混合继电器输入/输出模块
BMX DDM 3202 K混合静态输入/输出模块
用于离散量I/O模块的TELEFAST 2连接接口链路
symbols.
The system uses the same set of configuration tool software to complete the configuration and debugging of process level, operation level and even fieldbus instruments, and uses the same
a global database.
The scale of the system is highly scalable, and a single-system supports 1 to a maximum of 100 control stations and 100 operating stations. each control
The station can support several thousand I/0 points at most, and the scale of the whole system can be expanded. The hardware of the system control station is encapsulated in an all-metal shell, which can withstand the most
Harsh industrial environment. The device can be installed either in a cabinet or on a wall. System complies with all current EMC standards and is CE marked
Chi.
Industrial” DCS system design purpose: the most economical engineering investment, the most powerful control function.
Five features of Industria1″ DCS system:
1. All-round integrated control system, integrating DCS & PLC & Field Bus;
2. Using RISC SuperScalar high-speed CPU, with super performance;
Three high reliability, strict industrial application practice, more than 1000 sets of application performance in China;
4. It has good openness, flexibility and scalability;
Fifth, the project is easy, the interface is friendly, and the maintenance is simple;
2. Industria1″ system communication
Industrial” system uses international standard industrial bus. Field controller supports Profibus, FF, ModBus, Can, etc.
International standard fieldbus, Profibus is the most widely used open fieldbus international standard in the world, divided into FMS, DP and PA
Level 3, DP communication rate can be as high as 12Mb. Profibus is used to connect intelligent devices such as distributed I/0 stations and field bus instruments.
Communication between the process station,
