FC-TSAI-1620M
FC-TSAI-1620M
FC-TSAI-1620M
介绍了ACS 600变频器的硬件、特性、技术要求。它指导你选择正确的ACS 600的型号和可选件，以及安装注意事项。
ACS 600 SingleDrive是新一代变频器，能达到控制交流电机的完美极限。ACS 600是第一代采用直接转矩控制技术(DTC)的交流变频器，它能够在没有光码盘或测速电机的反馈的条件下，精确控制任何标准鼠笼电机的速度和转矩。
ACS 600变频器满足多种应用要求一从最简单的到最复杂要求的应用。
□泵一离心泵，活塞泵，计量泵
□风机一强制通风机，引风机，离心式风机，轴向式风机
□搅拌器
□传送带，瓶装线，板式运送机和其它材料搬运应用
□提升机，电梯，起重机，卷扬机
□卷曲机一薄膜，纸，绳
□离心机
□挤压机一熔泵，造球机
ACS 600位移控制为高精度的控制应用提供了完美的解决方法，例如，ACP 600 位置控制，同步控制，转矩控制和速度控制。
ACP 600变频器属于ACS 600产品系列。使用了与ACS 600同样先进的电机控制方式和硬件解决方法。当然，由于采用了特殊设计，它与标准产品有一些区别。
□特殊的应用宏包括位置控制，同步控制，转矩控制和速度控制的应用宏。
□集成了脉冲增量编码器接口的I/O板。
□绝对值脉冲编码器可选件。
□增量脉冲编码器接口模块(NTACP-01)可选件。
ACC 600变频器属于ACS 600产品系列。使用了与ACS 600同样先进的ACC 600 电机控制方式和硬件解决方法。ACS 600提升机传动装有特殊的应用程序，包括标准提升机系统的功能：转矩记忆，功率优化，限幅开关监控，机械制动器控制，转矩验证等等。特殊提升机功能与直接转矩控制技术(DTC)结合在一起，保证了在较高要求的提升机应用中的精确控制。
Glossary
Process station:
This term is used to describe AC800F controllers (field controllers) and rack-mounted controllers. A process station can be designed to be redundant
configuration and non-redundant configuration.
AC800F :
This term is used to describe the AC800F Field Controller type of process station. A redundant process station consists of 2
AC800F controller.
Rack mounted process station:
This term is used to describe a rack-mounted type of process station. A redundant process station contains 2 rack-mounted CPUs.
This term is used to describe a single, non-redu
ndant process station.
In the investment of modern automation system, due to the hardware equipment department
It only takes up less cost in the whole system, then write engineering applications
The cost of software becomes increasingly important. Generally speaking, a self
The engineering application software cost of the automation project accounts for about the entire project.
About 50%, it is not difficult to see that the migration of cost structure creates a lot of innovation for users.
Create an opportunity to optimize project investment, therefore, it is necessary to start from engineering programming
Think about lowering costs in the first place!
This is what we developed the Freelance 800F system for:
Keeping hardware prices consistent with those of programmable logic controllers
In this way, cost efficiency can be improved by reducing user engineering costs.
How the Freelance 800F process control system helps users reduce
Low engineering cost?
●By using a complete engineering tool (Control Builder
F) to configure the entire control system, including automation functions
function, operator interface display and logging, and configuration of the fieldbus.
equipment (PROFIBUS, FOUNDATION Fieldbus,
HART, etc.) and device parameter settings.
● Automatic generation of global data between the process control station and the operator station
According to communication.
For field devices, process control stations and operator stations, a unified global database is used for the entire control system, thereby reducing
cost and time investment in establishing data communication and interactive access.
And ensure the consistency of data throughout the system.
