TK-FTEB01
TK-FTEB01
TK-FTEB01
• 启动 介绍如何构建控制程序，以及如何通过 I/O 接口控制变频器。
• 通过 PC 工具对变频器进行编程 介绍如何通过 PC 工具(DriveStudio 和/或DriveSPC)进行编程。
• 变频器的控制与功能 介绍变频器的控制地和运行模式以及应用程序的特点。
• 控制单元的缺省连接 介绍 JCU 控制单元的缺省连接。
• 参数与固件模块 介绍变频器参数与固件功能块。
• 参数数据 更深入地介绍了变频器的参数信息。
• 故障跟踪 列出了警告和故障消息，以及可能的原因和处理方法。
• 标准功能模块
• 应用程序模板
• 控制链框图
• 附录 A – 现场总线控制 介绍变频器和现场总线之间的通信。
• 附录 B – 变频器对变频器连接 描述通过变频器对变频器链路连接在一起变频器之间的通信。
• 附录 C – 归位模式 描述了归位模式 1…35。
Modbus Different physical interfaces can be selected for different connection schemes, RS422, RS485, RS232. All interfaces are electrical isolation
Away. And the redundant operation is realized by two redundant field controllers.
Fi8i0f card is a triple can bus protocol interface card (rate 1mbd) used to connect industrial ial “conventional process control station
The i/0 protection unit of the PS is used to receive process signals from the rack mounted i/0 modules supported by the PS. Each field controller PS can only be configured
-Block fi810f card. — The two fi810f interface cards on the redundant PS. can be switched redundantly.
S800 and S900 are distributed i/0 for process control stations. They communicate with their controllers through Prof ibusdp Fieldbus
Communication, which can be installed in the controland PA three levels, DP communication rate can be as high as 12Mb. The CAN (DIN/IS011898 standard) bus
The biggest feature is its super sturdiness and data security. The system of course also supports Modbus. The communication with the intelligent field instrument is through
IART protocol or field bus (31. 25Kb ProfibusPA and FF bus).
The system communication between the operation management level and the process control level is realized by Di giNetS network (Industrial Ethernet/IEEE802.3 standard),
Users can choose the communication transmission medium (ordinary cable or optical fiber) and network topology according to the actual situation of the application.
The popular PC and MS_ Windows 2000 have been widely used in various fields all over the world, becoming the de facto standard computer platform.
tower. The operating station 0S, the engineering station ES and the data gateway GS of the Industrial” system use this platform to ensure the system’s
Versatility, openness and ease of use, and bring great convenience
