140CPU67160C SCHNEIDER
140CPU67160C SCHNEIDER
140CPU67160C SCHNEIDER
ACS880是ABB全能型的工业传动。由壁挂式传动、传动模块和柜体式传动组成。
·ACS880-01壁挂式单传动，额定功率：0.55到250 kW
·ACS880-07柜体式单传动，额定功率：45到2800 kW
·ACS880-11壁挂式能量回馈型传动，额定功率：2.2到110 kW
·ACS880-17柜体式能量回馈型传动，额定功率：45到3200 kW
·ACS880-31壁挂式超低谐波型传动，额定功率：2.2到110 kW
·ACS880-37柜体式超低谐波型传动，额定功率：45到3200 kW
·ACS880-07CLC柜体式水冷型传动，额定功率：250到6000 kW
lder without additional software. The interface card can be configured redundantly (separated between each other
Redundant basic unit pm802f) and can be plugged in and out and replaced online.
Fi830f: PROFIBUS DP interface card, as the master station, can connect 126 PROFIBUS DP slave stations, and the communication rate can reach 12mbd
One PS can plug in 4 fieldbus interfaces, connect 496 fieldbus devices, and one city (subsystem) of industrial “system can
Connect 4960 fieldbus devices (10000 i/0).
Fi820f: two serial interfaces are provided to connect the serial protocol equipment. The maximum transmission rate is 38.4kbd and can be configured. Its Standards Association
Modbus Different physical interfaces can be selected for different connection schemes, RS422, RS485, RS232. All interfaces are electrical isolation
Away. And the redundant operation is realized by two redundant field controllers.
Fi8i0f card is a triple can bus protocol interface card (rate 1mbd) used to connect industrial 
ial “conventional process control station
ial “conventional process control stationThe i/0 protection unit of the PS is used to receive process signals from the rack mounted i/0 modules supported by the PS. Each field controller PS can only be configured
-Block fi810f card. — The two fi810f interface cards on the redundant PS. can be switched redundantly.
S800 and S900 are distributed i/0 for process control stations. They communicate with their controllers through Prof ibusdp Fieldbus
Communication, which can be installed in the controland PA three levels, DP communication rate can be as high as 12Mb. The CAN (DIN/IS011898 standard) bus
The 
