216VC62a
216VC62a
216VC62a
VersaMax是GE公司按照独一无二的“Six Sigmai原则进行优化设计制造。“Six Sigmai意味着应用全面的研究和开发技术、分析众多的用户要求、符合严格的质量控制标准。VersaMax完全满足UL，CUL，CE，Class I 20ne2和Class I Division2等国际标准。
VersaMax产品特点：
使用方便，经济实用
·直观的特性设置
– I/O模块和通讯模块都可带电插拔
·自动配置IO地址和参数
·真正的即插即用
·无机架的紧凑结构，安装方便
·模块安装、扩展不需要任何工具
·模块化结构，构成系统可大可小
·安装费用低，减少工程成本
高可靠性和连续性
·遵照“Six Sigmai原则进行优化设计
·先进的故障诊断
·可恢复的电子短路过载保护(ESCP)
·拔掉模块的状态可预先设定
丰富的产品结构
·全系列的I/O模块
·高性能的CPU
·多种类型的接线端子
·开放的结构，众多网络通讯：
Modbus RTU
DeviceNet
Profibus-DP
Genius总线
Ethernet
different connection schemes, RS422, RS485, RS232. All interfaces are electrical isolation
Away. And the redundant operation is realized by two redundant field controllers.
Fi8i0f card is a triple can bus protocol interface card (rate 1mbd) used to connect industrial ial “conventional process control station
The i/0 protection unit of the PS is used to receive process signals from the rack mounted i/0 modules supported by the PS. Each field controller PS can only be configured
-Block fi810f card. — The two fi810f interface cards on the redundant PS. can be switched redundantly.
S800 and S900 are distributed i/0 for process control stations. They communicate with their controllers through Prof ibusdp Fieldbus
Communication, which can be installed in the controland PA three levels, DP communication rate can be as high as 12Mb. The CAN (DIN/IS011898 standard) bus
The biggest feature is its super sturdiness and data security. The system of course also supports Modbus. The communication with the intelligent field instrument is through
IART protocol or field bus (31. 25Kb ProfibusPA and FF bus).
The system communication between the operation management level and the process control level is realized by Di giNetS network (Industrial Ethernet/IEEE802.3 standard),
Users can choose the communication transmission medium (ordinary cable or optical fiber) and network topology according to the actual situation of the application.
The popular PC and MS_ Windows 2000 have
