216EA62 ABB

216EA62 ABB

216EA62 ABB

216EA62 ABB

GE Fanuc 90-30系列高速计数器模块用户手册（中文）提供了安装和使用系列90 -30可编程控制器高速计数器模块所需要的详细规格，硬件接口需求和编程信息。
高速计数器模块, 订货号 IC693APU300, 可为系列 90 -30可编程逻辑控制器(PLC)提供高达80KHz的工业控制快速脉冲信号的直接处理，例如：
 涡轮流量计
 计量校准
 速度测量
 物料运输
 动作控制
 过程控制
直接处理表示本模块可以检测输入，处理输入计数信息以及控制输出而无需通过同CPU的通讯。
高速计数器使用16个字的输入寄存器. 由 16 位开关量输入寄存器 (%I)和15 个字的模拟量输入寄存器(%AI)组成. 这些输入在每个CPU扫描周期更新一次。高速计数器同时使用16位开关量输出寄存器(%Q)，同样每个扫描周期更新一次。
高速计数器使用系列90-30 手持编程器或使用Logicmaster 90-30 编程软件配置工具进行配置. 大量属性可以通过用户应用程序进行配置。每个属性设置成工厂默认设置即可以适合大多应用程序 模块上没有跳线或 DIP

interconnected with each other to form a special

Redundant communication link (diginetr) to ensure information synchronization between master and slave PS. — However, the master PS fails, and the slave PS can quickly and undisturbed connect the replacement worker

Make. All inputs and outputs also support redundant operation.

 

The data communication between the field process controller PS. operating station 0s and the engineer station es is completed by the system network (diginets), which is inserted

The – Ethernet network card on the PS basic unit provides the interface between PS and diginets. ES. Hardware configuration and PS

The user program is downloaded to the PS CPU through diginets and the first network card. After the field bus interface card is newly installed or replaced, the required group

The status information will be automatically reloaded. The configuration results and real-time process data are stored in RAM, and ram is installed on the Ethernet network card or battery card

The backup battery can maintain the configuration content and data in case of power failure.

Basic unit pmbo2f characteristics:

mouth

Installation slots of 4 fieldbus interface cards

c

Installation slot of 2 Ethernet network cards

Support redundant operation of Fieldbus interface card

Support hot plug of Fieldbus interface card

Technical indicators of basic unit pib02f:

CPU :Intel 80960HT25/75

32-bit RISC superscalar processor with operation speed of 150 MIPS

4 MB FLASH-EPROM

EEPROM，serial， 16 Kbit

o

Ram 8 MB (with error check and correction function, abb patent)

16 K internal cache (CPU cache RAM)

Ram backup battery (matchdog, optional redundancy)

Equipment internal temperature monitoring

Watchdog

I/0 sweeping cycle: configurable.

Time required to process 1000 IL (instructions):

< 1.0 ms (processing binary and 16 bit arithmetic instructions)

<2ms (processing fixed-point arithmetic instructions)

< 1.5ms (processing 32-bit floating-point