HIMA F4102
ABB Industial”DCS
控制系统的实时趋势显示和历史趋势显示没有限制。
在一个趋势画面中可显示以下内容:
● 最多6个不同颜色的趋势曲线
●带简短注释的相应测量点名称
当前测量点值及其量程和单位
趋势显示可进行如下改变:
●移动时间轴以显示过去值
●暂时取消趋势曲线
●移动和缩放显示画面
●对每 个趋势进行的特殊设定(如颜色、插入值)
●选择不同的时间刻度 范围(从秒到周)
如果对某个趋势显示组态了归档(历史趋势)功能，则操作站周期性地对其测量值进行采样。这
些归档值可被存储在任何数据媒体上或通过FTP (文件传输协议)发送到以太网上的任何节点。这些
数据用于进一步评估 ( 可用Industrial”系统的数据浏览软件DigiBrowse) .
消息列表及操作员提示
现场控制器PS检测出的过程故障或开关量变化连同其时间标签(事件发生时刻)，将一同被送
往操作站作为消息通报。
Industr ial”系统提供以下消息类型:系统故障、过程报警、开关动作和操作员提示。可为过
程消息类型指定不同的优先级(从0~5)，系统故障另分成三个优先级(SI ~S3).不同优先级的消息
以不同的颜色显示并可选择不同的确认方法。此外还显示过程点的名称和故障状态。
Compatibility) according to EN50082
mouth
Certifications: CE, NAMUR, CSA, CSA-NRT
Glossary
Process station:
This term is used to describe AC800F controllers (field controllers) and rack-mounted controllers. A process station can be designed to be redundant
configuration and non-redundant configuration.
AC800F :
This term is used to describe the AC800F Field Controller type of process station. A redundant process station consists of 2
AC800F controller.
Rack mounted process station:
This term is used to describe a rack-mounted type of process station. A redundant process station contains 2 rack-mounted CPUs.
This term is used to describe a single, non-redundant process station.
In the investment of modern automation system, due to the hardware equipment department
It only takes up less cost in the whole system, then write engineering applications
The cost of software becomes increasingly important. Generally speaking, a self
The engineering application software cost of the automation project accounts for about the entire
