与组态时不同，调试时可显示I/0变量的实时值以及数
字信号的实时状态(0或1)，例如FBD图中数字信号线的外形变化(实
线或虚线)就反映其状态。过程变量的当前值可同时反映在数值窗口
与趋势窗口中，为功能测试与调整提供了极其方便的手段。不仅可显示当前调出程序的1/0变量，而
且能够显示来自其它程序变量和中间变量的实时值。
可以在调试过程中修改参数以实现程序优化设置，调试者可决定修改是临时的或永久性的。通过
参数.上载可浏览某段时间所做的修改，并进一步选择存储那些永久性参数以保证冷启动时不会丢失。
输入输出强制及设定新值功能用于动态仿真目的。
BF (Control Builder F)的组态方式与调试方式之间的简单切换使得应用程序的修改十分容
易。下载程序时可选择下载全部或局部组态，故当系统在线(保持运行并与实际生产过程相连)而又必
须修改控制方案时，CBF 可以进行在线组态而不必停车。
Three high reliability, strict industrial application practice, more than 1000 sets of application performance in China;
4. It has good openness, flexibility and scalability;
Fifth, the project is easy, the interface is friendly, and the maintenance is simple;
2. Industria1″ system communication
Industrial” system uses international standard industrial bus. Field controller supports Profibus, FF, ModBus, Can, etc.
International standard fieldbus, Profibus is the most widely used open fieldbus international standard in the world, divided into FMS, DP and PA
Level 3, DP communication rate can be as high as 12Mb. Profibus is used to connect intelligent devices such as distributed I/0 stations and field bus instruments.
Communication between the process station, operator station and engineering station takes place via the system bus DigiNetS (Industrial Ethernet). user
Different transmission media (RJ45 twisted pair, thin, thick or fiber optic cables and mixed media) and network topology can be selected for the system bus.
Simple layout, due to the use of TCP/IP protocol, the system can also use the public telephone network (dial-up mode) or satellite to achieve ultra-long-distance communication.
Subsystems such as PLC communicate with the Industrial” system through the ModBus protocol interface. The system also supports IEC870-5 over-control protocol.
discussion.
The Flash EPROM inside the PS provides more than 220 functional modules (control algorithm subroutines), in addition to the basic ones specified in the IEC 61131 3
