从功能块引脚和信号线的版面形式(粗细、颜色等)可以知道数
据类型。功能块参数定义的方法是在FBD参数对话框中行进行填空。完成后的FBD程序需经编译，检
查错误和语法。查出的错误或警告以列表显示，用鼠标单击表中某–行可直接转到相应的出错源址。
利用交叉参考功能，可迅速调出与错误对应的显示画面和程序并容易地找到相关变量和回路。
FRD的组态步骤如下:
1.定义FBD程序名称
5
2.调用FBD编辑器
功能&功能块
3.选择所需功能或功能块
4.将功能块放置在图形工作区
5.用信号流向线连接各功能块
6.键入输入输出变量
7.定义功能块参数
8.编译FBD程序
9.纠正语法错误
控制策略组态方法_顺序功能圉(SPC)
利用顺序功能图SFC可以方便地生成清晰的、图形化的顺序控制程序。
security. The system of course also supports Modbus. The communication with the intelligent field instrument is through
IART protocol or field bus (31. 25Kb ProfibusPA and FF bus).
The system communication between the operation management level and the process control level is realized by Di giNetS network (Industrial Ethernet/IEEE802.3 standard),
Users can choose the communication transmission medium (ordinary cable or optical fiber) and network topology according to the actual situation of the application.
The popular PC and MS_ Windows 2000 have been widely used in various fields all over the world, becoming the de facto standard computer platform.
tower. The operating station 0S, the engineering station ES and the data gateway GS of the Industrial” system use this platform to ensure the system’s
Versatility, openness and ease of use, and bring great convenience to future technical upgrades and maintenance.
System engineering is very convenient. The configuration language is based on the IE061131 3 industry standard, providing function block diagram (FBD), ladder diagram
