DS200TCPAF1AAB GE
DS200TCPAF1AAB GE
DS200TCPAF1AAB GE
介绍 EcoStruxure Control Expert 系统位和系统字。
Modicon M340、Modicon M580、Premium、Atrium、Quantum 和 Momentum PLC 使用 %Si 系统位，它们表示 PLC 的状态，或者用来控制 PLC 的操作方式。
可以在用户程序中测试这些位，以检测需要一系列处理过程的功能开发。
其中的某些位必须由程序将其复位到初始状态或正常状态。但是，对于由系统复位为初始状态或正常状态的系统位，不要通过程序或终端将其复位。
master station, can connect 126 PROFIBUS DP slave stations, and the communication rate can reach 12mbd
One PS can plug in 4 fieldbus interfaces, connect 496 fieldbus devices, and one city (subsystem) of industrial “system can
Connect 4960 fieldbus devices (10000 i/0).
Fi820f: two serial interfaces are provided to connect the serial protocol equipment. The maximum transmission rate is 38.4kbd and can be configured. Its Standards Association
Modbus Different physical interfaces can be selected for different connection schemes, RS422, RS485, RS232. All interfaces are electrical isolation
Away. And the redundant operation is realized by two redundant field controllers.
Fi8i0f card is a triple can bus protocol interface card (rate 1mbd) used to connect industrial ial “conventional process control station
The i/0 protection unit of the PS is used to receive process signals from the rack mounted i/0 modules supported by the PS. Each field controller PS can only be configured
-Block fi810f card. — The two fi810f interface cards on the redundant PS. can be switched redundantly.
S800 and S900 are distributed i/0 for process control stations. They communicate with their controllers through Prof ibusdp Fieldbus
Communication, which can be installed in the controland PA three levels, DP
