MVME5500-0163
MVME5500-0163
MVME5500-0163
适用于具有以下选件的 ACS880 多传动：急停、带 STO 的 1 类停止、安全继电器
（选件+Q964）。在此急停选件中，传动的主接触器/ 断路器未断开。
选件 +Q964 根据 1 类停止 (EN/IEC 60204-1) 与受控的停止相对应。此选项与安全停止 1(SS1) 功能对应。在用户发出急停命令后，传动首先会根据预设的斜坡时间将电机减速至零速。然后，此选件会激活安全力矩关断 (STO) 功能，此功能可禁止传动输出功率半导体的控制电压。这样可防止逆变器单元生成电机旋转所需的力矩。传动的主接触器/ 断路器不断开
control system monitoring operation function is realized
Can (operate and display, print, trend display and alarm), and also complete system hardware diagnosis and data exchange between different systems
Yes. The process control level realizes various loop adjustments including complex control (various PID, ratio, Simith, etc.) and high-speed logic control
Control, sequence control and batch intermittent control functions.
The internal communication of the process control station (between the controller and various intelligent devices such as i/0 or field instruments) adopts the international standard field general
Line. The field controller supports various field buses such as PROFIBUS, which is the most widely used open field bus in the world
Line international standard, divided into FMS, DP and PA, DP communication rate can be as high as 12MB. Can (din/is011898 standard) bus
The biggest feature is its super robustness and data security. The system also supports MODBUS. The communication with intelligent field instruments is through
IART protocol or fieldbus (31.25kb profibuspa and FF Bus).
The system communication between the operation management level and the process control level is
