ABB SCYC51020
ABB SCYC51020
ABB SCYC51020
Micro870 控制器是 Micro800® 系列的最新产品，它能为机器制造商和最终用户提供更高水平的扩展性、灵活性和定制性能。
Micro870 控制器专为较大的单机应用而设计，标配大容量存储器，可容纳更多模块化程序及应用用户自定义功能块。嵌入式运动控制功能支持至多2 轴运动TouchProbe 指令能够记录轴的位置，比使用中断更加精确。此外，Micro870 控制器能通过 EtherNet/IP™、串行端口和 USB 端口在各类网络中与其他设备通信。
The fieldbus interface card returns the corresponding fieldbus actuator.
Two field controllers can realize controller 1:1 redundancy, and undisturbed switching between master and slave PS. Two on each PS
Ethernet network card, the second network card is used to connect the system network diginets), and the second network cards can be interconnected with each other to form a special
Redundant communication link (diginetr) to ensure information synchronization between master and slave PS. — However, the master PS fails, and the slave PS can quickly and undisturbed connect the replacement worker
Make. All inputs and outputs also support redundant operation.
The data communication between the field process controller PS. operating station 0s and the engineer station es is completed by the system network (diginets), which is inserted
The – Ethernet network card on the PS basic unit provides the interface between PS and diginets. ES. Hardware configuration and PS
The user program is downloaded to the PS CPU through diginets and the first network card. After the field bus interface card is newly installed or replaced, the required group
The status information will be automatically reloaded. The configuration results and real-time process data are stored in RAM, and ram is installed on the Ethernet network card or battery card
The backup battery can maintain the configuration content and data in case of power failure.
Basic unit pmbo2f characteristics:
mouth
Installation slots of 4 fieldbus
