ABB OCAHG 492838402
ABB OCAHG 492838402
ABB OCAHG 492838402
Connected Components Workbench作为单一开发环境，以配置设备、为Micro800控制器编程以及创建 HMI 屏幕。
Connected Components Workbench 支持 Micro800 控制器、PowerFlex驱动器、PanelView 800 图形终端、Guardmaster 440C-CR30 可配置安全继电器和速度监视安全继电器、GuardShield 450L 安全光栅、SMC 软启动器和 Kinetix 组件伺服驱动器。
Connected Components Workbench 软件可用于控制器编程和设备配置，集成有 HMI 编辑器，进一步简化了单机设备编程。
·Micro800 控制器
·PanelView Components 和 PanelView 800 图形终端
·Guardmaster 440C-CR30 安全继电器
·GuardShield 450L 安全光栅
realized through the system bus diginets (Industrial Ethernet). user
Different transmission media (RJ45 twisted pair, thin cable, thick cable or optical fiber cable and mixed media) and network topology can be selected for the system bus
Due to the adoption of tcp/ip protocol, the system can also realize ultra long distance communication with the help of public telephone network (dial-up mode) or satellite.
PLC and other subsystems communicate with industrial “system through Modbus protocol interface. The system also supports iec870-5 over control coordination
Discussion.
The flash EPROM inside PS provides more than 220 function modules (control algorithm subroutines), in addition to the base specified in IEC 61131 3 standard
In addition to this content, many powerful and strictly tested function blocks from practical engineering applications are also expanded. Any complex control
All schemes can be realized by the combination of these function blocks.
The function blocks provided by the system mainly fall into the following categories:
o
Analog quantity processing
o
Digital quantity processing
