5SHY3545L0009 ABB
5SHY3545L0009 ABB
5SHY3545L0009 ABB
介绍可在 X80 RIO 子站中使用的适配器模块。
此指南介绍以下适配器模块：
·BMECRA31210
·BMXCRA31210
·BMXCRA31200
注意： 本书讨论 M580 系统中的 BM•CRA312•1 适配器模块。如要在 M580 系统中使用 Quantum 140CRA312•0 适配器模块，请参阅章节以太网远程 I/O 模块的特性 (参见Quantum EIO, 远程 I/O模块, 安装和配置指南)。
这些 CPU 支持包含 140CRA312•0 适配器模块的 Quantum RIO 子站：
·BMEP584040（2.10 版或更高版本）
·BMEP585040
·BMEP586040
·BMEH584040
·BMEH586040
actuator.
Two field controllers can realize controller 1:1 redundancy, and undisturbed switching between master and slave PS. Two on each PS
Ethernet network card, the second network card is used to connect the system network diginets), and the second network cards can be interconnected with each other to form a special
Redundant communication link (diginetr) to ensure information synchronization between master and slave PS. — However, the master PS fails, and the slave PS can quickly and undisturbed connect the replacement worker
Make. All inputs and outputs also support redundant operation.
The data communication between the field process controller PS. operating station 0s and the engineer station es is completed by the system network (diginets), which is inserted
The – Ethernet network card on the PS basic unit provides the interface between PS and diginets. ES. Hardware configuration and PS
The user program is downloaded to the PS CPU through diginets and the first network card. After the field bus interface card is newly installed or replaced, the required group
The status information will be automatically reloaded. The configuration results and real-time process data are stored in RAM,
