IMG_20191015
IMG_20191015
IMG_20191015
NX100 可构筑用一台控制柜同时控制多台机器人或多个外部轴系统。
协调/ 独立控制功能是使机器人或外部轴协调作业或者独立作业的功能，该功能可根据作业要求选择最佳动作方式。为Motoman EtherNet/IP PCIEtherNet/IP PCI接口卡((P/N 154310-1)提供说明 。此板的引用程序允许通过其他设备将NX100的一般用途I/O数据传输与EtherNet/IP相连接 。 MPE720 Ver.7是集成综合伺服、变频器、I/O设备的操作于一体的软件工具。
MPE720 Ver.7不仅是控制器程序，还是从设置，调整，编程，维护和管理机械设备（例如伺服驱动器，变频器，分布式IO设备等）所需的设备的整个开发过程。这是一个系统集成工程工具，配备有必要的功能。
MPE720 Ver.7对连到网络上的AC伺服驱动器／变频器进行调试、维护。可如同和机器直接相连那样进行调试和维护。无需换线作业，提高了效率。
适用于伺服驱动器、变频器、分散I/O设备等机械装置的设计所需设备的设置、调整、编程直至维护、检查等所有开发工序的功能的系统整合工程工具。
IMG
operators
stand. ControlBuilderF engineering station configures and adjusts the system
Mode. Usually, we can use portable devices such as notebooks to
The system is now configured in the office and on site. Operator-level PC
Can also be used as an engineer station. Engineer standing during system uptime
Intervals can be closed without a permanent connection to the system.
Freelance 800F Process Control Stage
At the process control level, the Freelance 800F system can be controlled by
It consists of a number of process control stations connected to I/O units. you can choose this
Some process stations are in redundant mode (CPU redundancy, fieldbus module redundancy
redundant) or non-redundant mode. Modular pluggable input/output modules
Blocks are freely selected and used according to the type and number of system process signals.
AC800F controller connects remote I/O or field device via fieldbus
ready.
system communication
Communication between operator level and process control level using TCP/IP
Protocol system bus (based on Ethernet), you can choose different
transmission medium such as AUI, twisted pair, fiber optic or coaxial cable.
Freelance OPC server for connecting to higher-level operators
station (800xA) or other OPC client. Freelance Control System
Real-time process values ??and alarms in the system can be accessed via OPC.
We also provide a C language programming interface to embed external
In Windows operating system applications, it is suitable for implementing user
Communicate with non-standard OPC, ie DMS-API software package.
Project database
All configured signals, variables and process points are in Freelance
800F system’s public database for management.
● List of all variables
