SCXI-1600
SCXI-1600
SCXI-1600
PowerFlex 523 交流变频器非常适合注重经济实用型电机控制方案的机器。
PowerFlex 525 交流变频器非常适合系统集成简单且内置有 EtherNet/IP™ 和安全等标准功能的机器。
PowerFlex 527 交流变频器设计用于与 Allen-Bradley Logix 可编程自动化控制器 (PAC) 配合使用。对于能够获益于伺服驱动器和交流变频器具有相同驱动器配置体验的机器而言，PowerFlex 527 变频器是理想之选 － 内置有 EtherNet/IP 双端口，用于 EtherNet/IP 以及通过网络实现的安全功能。
功率额定值
–– PowerFlex 523 交流变频器：0.2…22 kW/0.25…30 Hp，满足全球 100-600V 的不同电压等级要求
–– PowerFlex 525 交流变频器：0.4…22 kW/0.5…30 Hp，满足全球 100-600V 的不同电压等级要求
–– PowerFlex 527 交流变频器：0.4…22 kW / 0.5…30 Hp，满足全球 100-600V 的不同电压等级要求
80960HT25/75
32-bit RISC superscalar processor with operation speed of 150 MIPS
4 MB FLASH-EPROM
EEPROM，serial， 16 Kbit
o
Ram 8 MB (with error check and correction function, abb patent)
16 K internal cache (CPU cache RAM)
Ram backup battery (matchdog, optional redundancy)
Equipment internal temperature monitoring
Watchdog
I/0 sweeping cycle: configurable.
Time required to process 1000 IL (instructions):
< 1.0 ms (processing binary and 16 bit arithmetic instructions)
<2ms (processing fixed-point arithmetic instructions)
< 1.5ms (processing 32-bit floating-point arithmetic instructions)
Bthernet network card ei801f/ei802f/ei803f
The industrial Ethernet network card provides communication with the system network diginet s (iee802.3 Ethernet standard)
Interface.
Basic characteristics:
1ee802.3 Ethernet standard
o
Ei801f provides 10base2 thin cable communication interface
Ei802f provides 10BASE5 thick cable connection (through AUI interface)
Ei803f provides 10Base-T twisted pair communication interface
32-bit data bus, 100 mb/s
DMA (direct memory access) mode main memory ram, corresponding CPU operating load <4%
Optional ram backup battery
Fieldbus interface replacement card fi830f/fi820f/fi810f
Fieldbus interface cards are divided into several types according to different protocol standards. Each interface card provides – a fieldbus interface (PROFIBUS,
Can, FF, MODBUS, etc.). The configuration and parameter settings of the interface card itself and the field instrument (or remote i1/0) on the connected fieldbus are still
It is designed by the industrial “unified tool control bui lder without additional software. The interface card can be configured redundantly (separated between each other
Redundant basic unit pm802f) and can be plugged in and out and replaced online.
Fi830f: PROFIBUS DP interface card, as the master station, can connect 126 PROFIBUS DP slave stations, and the communication rate can reach 12mbd
One PS can plug in 4 fieldbus interfaces, connect 496 fieldbus devices, and one city (subsystem) of industrial “system can
Connect 4960 fieldbus devices (10000 i/0).
Fi820f:
