IS200ERAXH1A
IS200ERAXH1A
IS200ERAXH1A
剩余电流动作保护器 – GSH200、GS200、GDA200、GSN201、DS201、DDA200、F200
电弧故障保护器
隔离开关 – SD200
熔断式隔离开关/熔断器座 – E90
导轨开关 – E210
剩余电流监视器 – RD
定时器 – AT（机械式）/ D Line（数字式）
电涌保护器 – OVR
终端配电母排系统 – SMISSLINE TP
导轨式安装电表 – EQ C、EQ B、EQ A
多回路监测系统 – CMS
智能配电管理单元 – PMU
开关插座
王朝、欧悦、德灵、德典、德纯、德炫、德悦、轩致、德宁、德静、德逸、德韵直边
由·艺、由悦、由雅、永致
电能质量产品
低压电容器 – CLMD
电容电抗器组合 – CLMR
功率因数控制器 – RVC、RVT
无功功率补偿柜 – RC、RCR
实时动态无功功率补偿器 – Dynacomp
有源动态滤波器 – PQFI、PQFM、PQFS
箱壳类产品
终端配电箱 – ACM、ACP、
低压配电箱 – MCU
多功能控制箱 – SPM
多功能控制箱 – Gemini
the same
a global database.
The scale of the system is highly scalable, and a single-system supports 1 to a maximum of 100 control stations and 100 operating stations. each control
The station can support several thousand I/0 points at most, and the scale of the whole system can be expanded. The hardware of the system control station is encapsulated in an all-metal shell, which can withstand the most
Harsh industrial environment. The device can be installed either in a cabinet or on a wall. System complies with all current EMC standards and is CE marked
Chi.
Industrial” DCS system design purpose: the most economical engineering investment, the most powerful control function.
Five features of Industria1″ DCS system:
1. All-round integrated control system, integrating DCS & PLC & Field Bus;
2. Using RISC SuperScalar high-speed CPU, with super performance;
Three high reliability, strict industrial application practice, more than 1000 sets of application performance in China;
4. It has good openness, flexibility and scalability;
Fifth, the project is easy, the interface is friendly, and the maintenance is simple;
2. Industria1″ system communication
Industrial” system uses international standard industrial bus. Field controller supports Profibus, FF, ModBus, Can, etc.
International standard fieldbus, Profibus is the most widely used open fieldbus international standard in the world, divided into FMS, DP and PA
Level 3, DP communication rate can be as high as 12Mb. Profibus is used to connect intelligent devices such as distributed I/0 stations and field bus instruments.
Communication between the process station, operator station and engineering station takes place via the system bus DigiNetS (Industrial Ethernet). user
Different transmission media (RJ45 twisted pair, thin, thick or fiber optic cables and mixed media) and network topology can be selected for the system bus.
Simple layout, due to the use of TCP/IP protocol, the system can also use the public telephone network (dial-up mode) or satellite to achieve ultra-long-distance communication.
Subsystems such as PLC communicate with the Industrial” system through the ModBus protocol interface. The system also supports IEC870-5 over-control protocol.
discussion.
The Flash EPROM inside the PS provides more than 220 functional modules (control algorithm subroutines), in addition to the basic ones specified in the IEC 61131 3 standard
In addition to this content, many powerful
