IS200EPSMG1AED
IS200EPSMG1AED
IS200EPSMG1AED
ABB Ability™
·ABB Ability™ EDCS智能配电控制系统
·ABB Ability™ 配电系统资产健康管理解决方案
低压产品
断路器产品
·空气断路器 – Emax 2
·塑壳断路器 – Tmax XT、Tmax
·塑壳断路器 – Formula
低压控制产品
接触器
·通用型接触器 – AX、AF、A、EK
·热过载继电器 – TA、TF
·电子过载继电器 – E…DU、EF
·切换电容器用接触器 – UA、UA…RA
·建筑用接触器 – ESB
·中间继电器 – NX、NF
起动器
·软起动器 – PSTX
·电动机保护用断路器 – MS
电子产品和继电器
·电子时间继电器 – CT
·电子测量和监视继电器 – CM
·插拔式接口继电器 – CR
·开关电源 – CP
机械安全产品
·安全 PLC Pluto
·安全继电器Sentry系列
·安全光幕/光栅 Orion 系列
abb patent)
16 K internal cache (CPU cache RAM)
Ram backup battery (matchdog, optional redundancy)
Equipment internal temperature monitoring
Watchdog
I/0 sweeping cycle: configurable.
Time required to process 1000 IL (instructions):
< 1.0 ms (processing binary and 16 bit arithmetic instructions)
<2ms (processing fixed-point arithmetic instructions)
< 1.5ms (processing 32-bit floating-point arithmetic instructions)
Bthernet network card ei801f/ei802f/ei803f
The industrial Ethernet network card provides communication with the system network diginet s (iee802.3 Ethernet standard)
Interface.
Basic characteristics:
1ee802.3 Ethernet standard
o
Ei801f provides 10base2 thin cable communication interface
Ei802f provides 10BASE5 thick cable connection (through AUI interface)
Ei803f provides 10Base-T twisted pair communication interface
32-bit data bus, 100 mb/s
DMA (direct memory access) mode main memory ram, corresponding CPU operating load <4%
Optional ram backup battery
Fieldbus interface replacement card fi830f/fi820f/fi810f
Fieldbus interface cards are divided into several types according to different protocol standards. Each interface card provides – a fieldbus interface (PROFIBUS,
Can, FF, MODBUS, etc.). The configuration and parameter settings of the interface card itself and the field instrument (or remote i1/0) on the connected fieldbus are still
It is designed by the industrial “unified tool control bui lder without additional software. The interface card can be configured redundantly (separated between each other
Redundant basic unit pm802f) and can be plugged in and out and replaced online.
Fi830f: PROFIBUS DP interface card, as the master station, can connect 126 PROFIBUS DP slave stations, and the communication rate can reach 12mbd
One PS can plug in 4 fieldbus interfaces, connect 496 fieldbus devices, and one city (subsystem) of industrial “system can
Connect 4960 fieldbus devices (10000 i/0).
Fi820f: two serial interfaces are provided to connect the serial protocol equipment. The maximum transmission rate is 38.4kbd and can be configured. Its Standards Association
Modbus Different physical interfaces can be selected for different connection schemes, RS422, RS485, RS232. All interfaces are electrical isolation
Away. And the redundant
