IS200SDCCG5AHD
IS200SDCCG5AHD
IS200SDCCG5AHD
Lexium 32系列伺服包括3款伺服驱动器和2款伺服电机，以在运动控制应用中适应高性能、大功率和使用简便性的需求，以实现最佳应用。功率范围从0.15至7 kW。
Lexium 32伺服驱动器设计用以简化机器的生命周期。SoMove设置软件、并排式安装、带有色标的插入式连接器在伺服驱动器前面板或顶部易于使用，所有这些都使得安装启动和维护更为简便。由于提供有新的复制和备份工具，维护也更为快捷便宜。 Lexium23A 交流伺服驱动装置的特点概述如下：
? ·给定值的 2 通道模拟输入端(+/-10V，脉冲/ 方向)
? ·通过集成 HMI ( 装有调试软件的 PC) 进行调试。
? ·Jog、Electronic Gear、Velocity Control 和 Torque Control 运行模式。
? ·通过CANopen 通讯控制。
Basic characteristics:
1ee802.3 Ethernet standard
o
Ei801f provides 10base2 thin cable communication interface
Ei802f provides 10BASE5 thick cable connection (through AUI interface)
Ei803f provides 10Base-T twisted pair communication interface
32-bit data bus, 100 mb/s
DMA (direct memory access) mode main memory ram, corresponding CPU operating load <4%
Optional ram backup battery
Fieldbus interface replacement card fi830f/fi820f/fi810f
Fieldbus interface cards are divided into several types according to different protocol standards. Each interface card provides – a fieldbus interface (PROFIBUS,
Can, FF, MODBUS, etc.). The configuration and parameter settings of the interface card itself and the field instrument (or remote i1/0) on the connected fieldbus are still
It is designed by the industrial “unified tool control bui lder without additional software. The interface card can be configured redundantly (separated between each other
Redundant basic unit pm802f) and can be plugged in and out and replaced online.
Fi830f: PROFIBUS DP interface card, as the master station, can connect 126 PROFIBUS DP slave stations, and the communication rate can reach 12mbd
One PS can plug in 4 fieldbus interfaces, connect 496 fieldbus devices, and one city (subsystem) of industrial “system can
Connect 4960 fieldbus devices (10000 i/0).
Fi820f: two serial interfaces are provided to connect the serial protocol equipment. The maximum transmission rate is 38.4kbd and can be configured. Its Standards Association
Modbus Different physical interfaces can be selected for different connection schemes, RS422, RS485, RS232. All interfaces are electrical isolation
Away. And the redundant operation is realized by two redundant field controllers.
Fi8i0f card is a triple can bus protocol interface card (rate 1mbd) used to connect industrial ial “conventional process control station
The i/0 protection unit of the PS is used to receive process signals from the rack mounted i/0 modules supported by the PS. Each field controller PS
