IS200VTURH2B
IS200VTURH2B
IS200VTURH2B
工业用压力变送器：
通用型压力变送器1400C系列
在恶劣环境下使用的通用压力变送器7500系列
隔爆型满足重T业苛刻环境要求的压力变送器7800/7900系列
高精度并在恶劣环境下使用的压力变送器600系列
高精度小型湿一湿差压变送器-PTX120系列
数字可调量程的压力变送器6000系列
投入式液位变送器
经济型投入式液位计7533系列
高精度投入式液位计630系列
低价格、抗腐蚀投入式液位计-sLP
通用型投入式液位计1700系列
用于腐蚀环境的投入式液位计1800系列
用于污水环境的投入式液位计1290系列
数字可调量程的投入式液位计1930系列
微差压变送器：
通用型湿一湿微差压变送器LP1000系列
精度提高型湿一湿微差压变送器LP5000系列
高静压湿一湿微差压变送器LP8000系列
高精度、小差压、高静压微差压变送器LP9000系列
特殊用途传感器：
OEM专用传感器1000系列
高精度湿一湿差压传感器2100系列
高精度压力传感器4000系列
耐腐蚀高精度压力传感器800系列
CANbus教字输出高精度压力传感器DPs4000
发动机专用压力传感器一317，4300＆3500
航空／航天专用压力传感器330＆3000系列
微型结构压力传感器-200，35，42＆81
气象用大气压力传感器RPT系列
海上用高精度压力变送器651&671系列
海底用高精度压力变送器PTX300系列
海底井口用多参数变i羞器PTX400系列
钻井用锤型泥浆压力变送器PTX661系列
压力显示表：
高精度压力表DPI104
GE
the user, and then the calculation results are passed
The fieldbus interface card returns the corresponding fieldbus actuator.
Two field controllers can realize controller 1:1 redundancy, and undisturbed switching between master and slave PS. Two on each PS
Ethernet network card, the second network card is used to connect the system network diginets), and the second network cards can be interconnected with each other to form a special
Redundant communication link (diginetr) to ensure information synchronization between master and slave PS. — However, the master PS fails, and the slave PS can quickly and undisturbed connect the replacement worker
Make. All inputs and outputs also support redundant operation.
The data communication between the field process controller PS. operating station 0s and the engineer station es is completed by the system network (diginets), which is inserted
The – Ethernet network card on the PS basic unit provides the interface between PS and diginets. ES. Hardware configuration and PS
The user program is downloaded to the PS CPU through diginets and the first network card. After the field bus interface card is newly installed or replaced, the required group
The status information will be automatically reloaded. The configuration results and real-time process data are stored in RAM, and ram is installed on the Ethernet network card or battery card
The backup battery can maintain the configuration content and data in case of power failure.
Basic unit pmbo2f characteristics:
mouth
Installation slots of 4 fieldbus interface cards
c
Installation slot of 2 Ethernet network cards
Support redundant operation of Fieldbus interface card
Support hot plug of Fieldbus interface card
Technical indicators of basic unit pib02f:
CPU :Intel 80960HT25/75
32-bit RISC superscalar processor with operation speed of 150 MIPS
4 MB FLASH-EPROM
EEPROM，serial， 16 Kbit
o
Ram 8 MB (with error check and correction function, abb patent)
16 K internal cache (CPU cache RAM)
Ram backup battery (matchdog, optional redundancy)
Equipment internal temperature monitoring
Watchdog
I/0 sweeping cycle: configurable.
Time required to process 1000 IL (instructions):
< 1.0 ms (processing binary and 16 bit arithmetic instructions)
<2ms (processing fixed-point arithmetic instructions)
< 1.5ms (processing 32-bit floating-point arithmetic instructions)
Bthernet network card ei801f/ei802f/ei803f
The industrial Ethernet network card provides
