1756-BA2
1756-BA2
1756-BA2
TCSMCNAM3M002P 转换器是一种编程电缆，在进行正确安装后，它可用作 PC 系统虚拟 COM 端口。该转换器通过 USB 连接将串行信号转换为RS485 信号。它在配备了类型 A USB 端口的 PC 和配备了 RJ45 插头的 RS485 设备之间建立起链接。除单纯的通信功能外，它还会自动检测已连接的Schneider RS485 设备是否需要供电，并提供适当的电压（0V、5V 或 10V） 以一种经济，可靠，维护方便的接线方式代替原配网架空线中大量的分支成为一大难题，而电缆分支箱则彻底解决了这个问题，其全绝缘，全密封的特点大大降低了故障率，而且简单，方便，灵活的接线方式，在某些场合下，可代替环网柜。
在RM6及RM6可扩展的基础上，为满足市场上电缆分支箱的需求，结合多年的产品设计，制造与运行经验，成功开发出RM6-O系列SF6绝缘电缆分支箱。
connect 126 PROFIBUS DP slave stations, and the communication rate can reach 12mbd
One PS can plug in 4 fieldbus interfaces, connect 496 fieldbus devices, and one city (subsystem) of industrial “system can
Connect 4960 fieldbus devices (10000 i/0).
Fi820f: two serial interfaces are provided to connect the serial protocol equipment. The maximum transmission rate is 38.4kbd and can be configured. Its Standards Association
Modbus Different physical interfaces can be selected for different connection schemes, RS422, RS485, RS232. All interfaces are electrical isolation
Away. And the redundant operation is realized by two redundant field controllers.
Fi8i0f card is a triple can bus protocol interface card (rate 1mbd) used to connect industrial ial “conventional process control station
The i/0 protection unit of the PS is used to receive process signals from the rack mounted i/0 modules supported by the PS. Each field controller PS can only be configured
-Block fi810f card. — The two fi810f interface cards on the redundant PS. can be switched redundantly.
S800 and S900 are distributed i/0 for process control stations. They communicate with their controllers through Prof ibusdp Fieldbus
Communication, which can be installed in the controland PA three levels, DP communication rate can be as high as 12Mb. The CAN (DIN/IS011898 standard) bus
The biggest feature is its super sturdiness and data security. The system of course also supports Modbus. The communication with the intelligent field instrument is through
IART protocol or field bus (31. 25Kb ProfibusPA and FF bus).
The system communication between the operation management level and the process control level is realized by Di giNetS network (Industrial Ethernet/IEEE802.3 standard),
Users can choose the communication transmission medium (ordinary cable or optical fiber) and network topology according to the actual situation of the application.
The popular PC and MS_ Windows 2000 have been widely used in various fields all over the world, becoming the de facto standard computer platform.
tower. The operating station 0S, the engineering station ES and the data gateway GS of the Industrial” system use this platform to ensure the system’s
Versatility, openness and ease of use, and bring great convenience to future technical upgrades and maintenance.
System engineering is very convenient. The configuration language is based on the IE061131 3 industry standard,
