A402KC BASLER
A402KC BASLER
A402KC BASLER
中心卷曲／开卷机应用属于带材控制中最复杂的应用，透彻地掌握了解卷曲／开卷原理是掌握本手册的先决条件：
中心卷曲／开卷应用软件(PART#3AUA576999W108)被开发用于ABB的ACS600交流变频器，本应用软件使用功能图编辑(FCB)开发，用于ACS600版本代号：5.050
中心卷曲／开卷机的旋转力是加在卷曲或开卷机的卷筒轴上，当卷筒直径变化时，为了使材料的表面张力保持不变，必须保证转速的变化与卷径成反比且转矩的变化与卷径成正比。
keyboard.
Operator level can install one engineering station and several operators
stand. ControlBuilderF engineering station configures and adjusts the system
Mode. Usually, we can use portable devices such as notebooks to
The system is now configured in the office and on site. Operator-level PC
Can also be used as an engineer station. Engineer standing during system uptime
Intervals can be closed without a permanent connection to the system.
Freelance 800F Process Control Stage
At the process control level, the Freelance 800F system can be controlled by
It consists of a number of process control stations connected to I/O units. you can choose this
Some process stations are in redundant mode (CPU redundancy, fieldbus module redundancy
redundant) or non-redundant mode. Modular pluggable input/output modules
Blocks are freely selected and used according to the type and number of system process signals.
AC800F controller connects remote I/O or field device via fieldbus
ready.
system communication
Communication between operator level and process control level using TCP/IP
Protocol system bus (based on Ethernet), you can choose different
transmission medium such as AUI, twisted pair, fiber optic or coaxial cable.
Freelance OPC server for connecting to higher-level operators
station (800xA) or other OPC client. Freelance Control System
Real-time process values ??and alarms in the system can be accessed via OPC.
We also 
